Craft Production (Other Keyword)

DOCUMENT Citation Only Jillian M. Jordan. Jaime Awe. Julie Hoggarth.

This is an abstract from the "Where Is Provenance? Bridging Method, Evidence, and Theory for the Interpretation of Local Production" session, at the 84th annual meeting of the Society for American Archaeology. Ceramic provenance studies often focus on resource acquisition to address the question "what is local?", overlooking the role that practice plays in vessel manufacture. Potters must learn to create viable ceramic vessels, engaging with learning networks that extend beyond conventionally...

DOCUMENT Citation Only Lorelei Platz. Carrie Dennett.

This is an abstract from the "Cross-Cultural Petrographic Studies of Ceramic Traditions" session, at the 84th annual meeting of the Society for American Archaeology. Spanning northwest Costa Rica and the Isthmus of Rivas in Pacific Nicaragua, the Greater Nicoya archaeological region has been historically interpreted as a cohesive language and culture area (‘primordially’ Chibchan but shifting to Mesoamerican post-AD 800). Since the 1980s, however, researchers have begun to increasingly...

DOCUMENT Citation Only Marcony Alves.

This is an abstract from the "Andean and Amazonian Ceramics: Advances in Technological Studies" session, at the 88th annual meeting of the Society for American Archaeology. The origins and the dispersal of the most widespread language families in the world is one of the enduring problems that bring together archaeology, linguistics, and genetics. In Amazonia, archaeological research has tentatively associated ceramic traditions (grouping different technological styles) and the expansion of...

DOCUMENT Citation Only Xin Su.

This is an abstract from the "New Thoughts on Current Research in East Asian Archaeology" session, at the 84th annual meeting of the Society for American Archaeology. The production of stone tools is a systematic human activity, and the utilization of stone materials is the basis of the entire production. Before conducting research on the entire stone production, we should observe the provenance of stones and the strategy of using these materials. Through the analysis of the lithic facies of...

DOCUMENT Citation Only Alejandra Alonso. Gregory Smith.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. This paper centers on the analysis of shell, lithics, and ceramics recovered from the ancient Maya community of Santa Cruz, located 3 km south of the secondary site of Ichmul de Morley in northern Yucatán. Ichmul de Morley appears to have had an expansive growth during the Late and Terminal Classic periods that might have encouraged local development of nearby...

DOCUMENT Citation Only Meng Guo.

This is an abstract from the "Technology and Design in 4th and 3rd Millennium BCE China" session, at the 84th annual meeting of the Society for American Archaeology. The Shimao site was a significant stone-walled settlement in Northern China dating to around 2000 BCE. In recent excavations, vast amounts of pottery sherds were unearthed from Huangchengtai, the stone-walled platform which was encircled by both the interior and exterior stone walls. Around 200 pottery sherds were examined by...

DOCUMENT Citation Only María Inés Velarde. Pamela Castro de la Mata.

Las sociedades de Paracas y Nasca que habitaban el actual territorio de Ica, desarrollaron una tradición metalúrgica con características locales particulares dentro de los Andes Centrales. Los orígenes de la producción metalúrgica en esta zona se relacionan con la presencia de Chavín durante el Horizonte Temprano, y se caracteriza por el predominante uso de oro laminado y trabajado en formas y diseños simples. Esta tradición metalúrgica se mantuvo durante varios siglos en el sur, casi a espaldas...

DOCUMENT Citation Only Steven Karacic.

The Hittite Empire seized control of Cilicia, corresponding with the present-day states of Mersin and Adana in the Republic of Turkey, in the latter half of the second millennium BCE. While this region was under imperial rule, Hittite-style pottery became the most common ceramic type. Geochemical analysis of the pottery from Tarsus-Gözlükule, an urban center within Hittite Cilicia, indicates that the Hittite-style pottery was locally produced. At the same time, alternative ceramic types are...

DOCUMENT Citation Only Elizabeth Paris. Ashley Megan Williams. Gabriel Laló Jacinto.

This is an abstract from the "Dynamic Frontiers in the Archaeology of Chiapas" session, at the 88th annual meeting of the Society for American Archaeology. This paper presents an analysis of obsidian artifacts from the ancient Maya city of Tenam Puente. The site is located in the eastern Chiapas highlands, and was occupied from approximately AD 500 to 1100. We analyze a sample of 859 obsidian artifacts from the site’s monumental zone, which were excavated by the Proyecto Tenam Puente,...

DOCUMENT Citation Only Shawn Lambert.

Instrumental Neutron Activation Analysis is used to determine whether Formative Caddo finewares (A.D. 850 -1150) were made locally in the Arkansas River Basin or produced by their Gulf Coastal Plain neighbors to the south. The preliminary INAA results, in concert with a stylistic study that indicates very few potters had the knowledge and skill to produce them, show that Formative Caddo finewares were made in the southern Caddo region and exported north to Arkansas River Basin mound centers for...

DOCUMENT Citation Only Sarah Nicole Boudreaux. Laura Levi. Christian Sheumaker.

It is now well recognized that Late Classic Maya communities varied politically, economically, and environmentally. The corollary, however, that community and household variation went hand-in-hand in the Maya area often goes unrecognized or under problematized. Research that explores differences in household provisioning practices across a range of communities should help to rectify this situation. Referencing data from two large prehispanic Maya sites in northwestern Belize, this paper asks the...

DOCUMENT Citation Only Laure Dussubieux. Thomas Fenn. Shinu Abraham. Alok Kanungo.

Scientific investigation of archaeological glass has advanced, beginning in the early 2000’s, with studies relying more heavily on determination of trace element concentrations to differentiate production recipes depending on distinct ingredient sources and the use of larger corpuses of artifacts to more easily and reliably reveal production patterns. At the same time, isotope analyses (e.g., Pb, Sr and Nd) attempting to source raw materials used to manufacture glass in antiquity grew in...

DOCUMENT Citation Only Ashley Cercone.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. Moving across Syria-Mesopotamia to Anatolia and finally to the Aegean, potters during the Bronze Age gradually began to shift their ceramic repertoire from hand-made and coil-made ceramics to wheel-made pottery. Despite this rise in innovative manufacturing technology (the potter’s wheel), some sites in Western Anatolia, namely Seyitömer Höyük, exhibit...

DOCUMENT Citation Only James Zimmer-Dauphinee. Arlen Talaverano. Kevin Jara. Steven Wernke.

The choice of clay and pigment sources for ceramic production in the Andes has the potential to convey complex information about the resilience and persistence of Inca social structure in the Colca Valley throughout the imposition of Spanish imperialism. Prior to the Spanish invasion, ceramics in the Colca Valley were likely primarily produced by a handful of specialized communities which would have widely distributed their products. It is therefore expected that there would be a standardization...

DOCUMENT Citation Only Niklas Schulze. Luis Barba.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. In pre-Hispanic Mexico the use and the importance of fire are demonstrated by materials and objects that, without the use of high temperature processes, or pyrotechnology in general terms, would not exist. As examples it will be sufficient to mention ceramics, metals and lime production. The processes that do not qualify as industrial and that employ lower...

DOCUMENT Citation Only Nathaniel Erb-Satullo.

This is an abstract from the "Archaeological Science and African Archaeology: Appreciating the Impact of David Killick" session, at the 88th annual meeting of the Society for American Archaeology. Work by David Killick and colleagues has documented rich landscapes of iron production sites in sub-Saharan Africa. By contrast, iron smelting and smithing sites have proven far more elusive in the Caucasus and the rest of the Near East. This situation has severely hampered our understanding of iron...

DOCUMENT Citation Only Kaitlin Ahern.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. In 1959, the Teotihuacan Mapping Project, led by Rene Millon, excavated at the site of Plaza One in Teotihuacan and acquired a myriad of artifacts, including lime plaster samples. This presentation focuses on the examination of these plaster samples via Optical Microscopy and SEM-EDS, which are used to evaluate the similarities and differences in the building...

DOCUMENT Citation Only Daniel Ionico.

European contact with Northern Iroquoian communities brought about a series of direct and indirect consequences. These involved European-disease epidemics and a series of migrations that moved people across the landscape as refugees, captives, or conquerors. Ceramic petrography offers a way for archaeologists to understand the impacts such demographic upheavals can have on technological systems. Iroquoian potters often use a recurrent set of rock and sand types that homogenize the paste-type...

DOCUMENT Citation Only Shinu Anna Abraham. Laure Dussubieux. Thomas Fenn. Alok Kumar Kanungo.

This is an abstract from the "Current Research on Ancient Glass around the Indian Ocean" session, at the 88th annual meeting of the Society for American Archaeology. Despite the widespread distribution of Indian-made glass beads around the Indian Ocean and beyond, not much is known about South Asia’s early glass industries from the first centuries BCE through the second millennium CE. This paper will present an overview of an ongoing project designed to use elemental and isotopic...

DOCUMENT Citation Only Scott Lyons.

This is an abstract from the "SAA 2021: General Sessions" session, at the 86th annual meeting of the Society for American Archaeology. Excavated sporadically for over 30 years, Ogata in Kashiwara City and Mori in Katano City are the largest-scale Kofun period ironworking sites in Osaka Prefecture, Japan. Large numbers of forging slags have been unearthed from both sites, which alongside partially preserved hearth features, provide the bulk of evidence for ironworking. Following methods...

DOCUMENT Citation Only Natalia Lozada Mendieta.

This is an abstract from the "Andean and Amazonian Ceramics: Advances in Technological Studies" session, at the 88th annual meeting of the Society for American Archaeology. Ceramic analyzes in precolonial archaeological sites in the Orinoco followed cultural history and ecological and evolutionary frameworks. However, the co-occurrence of different ceramic styles within common periods in multicomponent sites was not fully addressed, sometimes assuming it was the result of trade or from...

DOCUMENT Citation Only Gregory Lattanzi.

This is an abstract from the "From Hard Rock to Heavy Metal: Metal Tool Production and Use by Indigenous Hunter-Gatherers in North America" session, at the 88th annual meeting of the Society for American Archaeology. Raw metals have been used by prehistoric peoples throughout the world. In the Middle Atlantic region of the United States, the most favored metal was copper. Copper objects of all kinds were seen as holding major religious and ceremonial significance. While there is evidence of...

DOCUMENT Citation Only Hannah Mattson.

This is an abstract from the "SAA 2023: Individual Abstracts" session, at the 88th annual meeting of the Society for American Archaeology. Several decades ago, the NPS Chaco Project revealed evidence for widespread, small-scale ornament manufacture at small house sites in Chaco Canyon, as well as possible workshop-scale production at two locations. As consumption of finished jewelry items is clearly concentrated at great houses, it was suggested that lapidary production was part of a larger...

DOCUMENT Citation Only Laurie Webster.

This is an abstract from the "SAA 2023: Individual Abstracts" session, at the 88th annual meeting of the Society for American Archaeology. During the past decade, the Cedar Mesa Perishables Project has documented nearly 5,000 perishable artifacts from alcoves in southeastern Utah. As part of this work, the project has generated about 100 radiocarbon dates from well-preserved woven textiles, sandals, baskets, wooden implements, and other perishable items from the Grand Gulch, Butler Wash,...

DOCUMENT Citation Only Kaitlin Brown. Brian Barbier. Gina Mosqueda-Lucas.

This is an abstract from the "SAA 2023: Individual Abstracts" session, at the 88th annual meeting of the Society for American Archaeology. This paper explores Olivella shell money bead production among the Chumash during the Mission period in south-central California. An extensive examination of bead-making detritus recovered during recent archaeological excavations at Mission La Purisima Concepcion yielded insight into this extensive industry that flourished in the early nineteenth century....