Craft Production (Other Keyword)

26-50 (313 Records)

Being and Becoming: Learning, Skill, and Cognition as Exhibited on Painted White Ware Pottery at Sand Canyon Pueblo (5MT765), a Pueblo III Era Community Center in Southwestern Colorado (2023)
DOCUMENT Citation Only Jonathan Schwartz.

This is an abstract from the "SAA 2023: Individual Abstracts" session, at the 88th annual meeting of the Society for American Archaeology. This paper reports on the presenter's master's thesis research which examined painted white ware vessels from the Sand Canyon Pueblo site using an adapted 18-point attribute analysis developed by Patricia Crown for determining the age and skill level of producers of painted designs of pre-Hispanic southwestern ceramics. The thesis attempted to understand...


Beneath the Surface: Steps toward Resolving Gallinazo-Mochica Debates in Peru’s Northern North Coast (2018)
DOCUMENT Citation Only Kayeleigh Sharp.

Understanding the role of the widespread yet under-recognized art style known as Gallinazo, its persistence alongside the more conspicuous Mochica art style, and the social factors that facilitated their long-term coexistence on Peru’s North Coast during the first millennium, are primary concerns of this work. Investigation of the Songoy-Cojal site in the mid-Zaña Valley shows that Gallinazo-Mochica coexistence persisted at least until the 8th century CE (based on new C-14 dates). Many...


Bit by bit: Olivella bead production during the Middle Period on Santa Cruz Island (2016)
DOCUMENT Citation Only Brian Barbier.

Beads made from the Olivella biplicata shell were used as both decoration and a form of currency by the Chumash living in the Santa Barbara Channel region, and large quantities have been recovered from many prehistoric sites throughout Western North America. Many of the bead types were made from different portions of the shell and conform to standardized shapes and sizes. A number of these types have distinctive spatial and temporal distributions in the archaeological record, and based on...


Bone Craft Product and Economies in the Late Shang Period at Anyang, China (2016)
DOCUMENT Citation Only YI-LING LIN.

This paper will discuss recent analysis of worked animal bone discovered at the late Shang Xinanzhuang site, and the manufacture strategies and raw materials manipulations within different locations in Anyang, Henan. Xinanzhuang is considered to be associated with the industrial-scale boneworkshop at Tiesanlu site because of the close proximity between the two sites. Previous studies on bone artifacts from Tiesanlu provide some understanding of craft production systems during the late Shang...


Broken Edges: Investigating Jewelry Damage by Violence and Fatigue (2019)
DOCUMENT Citation Only Nancy Wicker.

This is an abstract from the "The State of the Art in Medieval European Archaeology: New Discoveries, Future Directions" session, at the 84th annual meeting of the Society for American Archaeology. Many Scandinavian Migration Period gold bracteate pendants of the 5th and 6th centuries show evidence of pre- or post-depositional damage. Impressions of broken edges of the jewelry were made with polyvinyl siloxane (PVS), and the impressions were then analyzed as part of a larger project to...


Bronze Age Crucibles in China: A Unique Technological Tradition and its Cultural Implications (2019)
DOCUMENT Citation Only Siran Liu.

This is an abstract from the "Craft and Technology: Knowledge of the Ancient Chinese Artisans" session, at the 84th annual meeting of the Society for American Archaeology. Most studies of early metallurgy in China have focused on style, manufacturing techniques and alloy compositions of bronze artefacts. In rare circumstances, other sections of the bronze production Chaîne opératoire such mining, smelting and metal processing are considered. This research concentrates on early bronze...


Building a Statistical Model to Evaluate the Sexes of Ancient Greek Fingerprints (2018)
DOCUMENT Citation Only Julie Hruby.

While fingerprint impressions have been used archaeologically to approach a range of cultural questions, the methodologies developed to date tend to be labor intensive, statistically unsophisticated, or require large numbers of complete prints. Recently, numerous quantitative print attributes that correlate with sex in modern populations have been discovered, almost always from two-dimensional data. It is probable that there are additional, yet-unrecognized features that correlate with producer...


Can You Predict the Pot? Using Morphometric Variability to Predict Potting Techniques (2021)
DOCUMENT Citation Only Ashley Cercone.

This is an abstract from the "Geometric Morphometrics in Archaeology" session, at the 86th annual meeting of the Society for American Archaeology. While geometric morphometrics (GMM) roots are in biology, there has been an increase of studies applying GMM to archaeological material in recent years. Archaeologists have utilized morphometrics to determine the level of craft specialization at prehistoric sites, test the symmetry of stone tools, classify ceramic sherds, examine the level of...


Castillo Decorated Ceramics as Boundaries Objects: A Reappraisal of the Tradición Norcosteña from Ceramic Technology (North Coast of Peru, Early Intermediate Period) (2023)
DOCUMENT Citation Only Alicia Espinosa.

This is an abstract from the "Andean and Amazonian Ceramics: Advances in Technological Studies" session, at the 88th annual meeting of the Society for American Archaeology. On the northern coast of Peru and throughout the Early Intermediate period, the frequent findings of Castillo Decorated effigy vessels in Virú (200 BC–AD 600/700) and Moche (AD 100–800) contexts have led several archaeologists to consider them as a northern coastal tradition. In this sense, these ceramics would have been...


Casting Technology and Craft Production of Bronze Wares in the Central Plains of China in Late Shang Dynasty (13thBC-11th BC) (2015)
DOCUMENT Citation Only Yu Liu. Zhanwei Yue.

Casting technology played a more significant role in the formation of Chinese ancient civilization than any other early civilizations. Accompanying with the appearance of bronze vessels in Erlitou period (1800B.C.-1500B.C.), the piece-mold casting technology was first established and then became a prolonging thousand-year traditional method after Shang Dynasty. The formation of piece-mold casting technology tradition, which is very different from mainly using the forging method and lost-wax...


Ceramic Production at the Stone-Walled Citadel of Shimao: Initial Results of Petrographic Analysis (2021)
DOCUMENT Citation Only Andrew Womack.

This is an abstract from the "Scaling Potting Networks: Recent Contributions from Ceramic Petrography " session, at the 86th annual meeting of the Society for American Archaeology. Over the last 10 years, excavations at the early Bronze Age site of Shimao (2300–1800 BC), in northern Shaanxi Province, have transformed our understanding of the archaeology of early China. What was previously seen as an area that was peripheral to the development of early dynastic centers is now being heralded by...


Ceramic Production during the Terminal Classic at Holtun, Guatemala (2021)
DOCUMENT Citation Only Dawn Crawford. Michael Callaghan. Daniel Pierce. William Gilstrap. Brigitte Kovacevich.

This is an abstract from the "SAA 2021: General Sessions" session, at the 86th annual meeting of the Society for American Archaeology. The use of provenance studies to answer anthropological questions related to the production and access of ceramics is well documented for the Maya region. Mineralogical and chemical compositional analyses are often used to identify the material origins, or provenance, of ceramics. In this paper, the authors report on Neutron Activation Analysis (INAA) and...


Ceramic Technological and Stylistic Boundaries on the Indus Frontier of Gujarat (2018)
DOCUMENT Citation Only Sneh Patel.

Rita Wright’s pioneering work on the ceramic stylistic and technological traditions of the Indo-Iranian borderlands highlighted the potential of new theoretical approaches to our understanding of cultural boundaries within South Asia. This work highlighted the complex nature of technology and style boundaries within specific contexts of cultural interaction. This paper takes inspiration from Dr. Wright’s work and applies this framework to another frontier of the Indus: the northwestern state of...


Ceramic Technology beyond the Rim: Reconstructing (and Firing) a Late Neolithic Chinese Kiln (2023)
DOCUMENT Citation Only Camilla Sturm. Liam Hayes. Anna Campbell.

This is an abstract from the "Ceramics and Archaeological Sciences" session, at the 88th annual meeting of the Society for American Archaeology. The past several decades have seen a shift in the focus of ceramic studies in Neolithic China from ceramic products toward ceramic production, as scholars have pushed beyond typological analyses to investigate the people who made, handled, and used these wares. Despite this turn toward process, comparatively little attention is given to the many...


Ceramics Crossing Temporal and Cultural Boundaries in the Moquegua Valley (2023)
DOCUMENT Citation Only Emilee Witte. Emily Schach. Donna Nash.

This is an abstract from the "SAA 2023: Individual Abstracts" session, at the 88th annual meeting of the Society for American Archaeology. Ceramic vessels have been produced and in use for thousands of years. Ceramicists are tasked with the duty of creating unique wares and transmitting production knowledge through formal or informal apprentice relationships. In this poster, we compare the vessel forms and functions from the Middle Horizon sites of Cerro Mejia and Cerro Baul to the Late...


Ceramics from Zorropata, a Middle Horizon Las Trancas Habitation Site in Nasca, Peru (2023)
DOCUMENT Citation Only Sarah Kerchusky.

This is an abstract from the "SAA 2023: Individual Abstracts" session, at the 88th annual meeting of the Society for American Archaeology. Early in the Middle Horizon (c. AD 650-1000), the Wari Empire expanded from its Ayacucho homeland and established at least three colonies in the SNR: Pacheco, Pataraya, and Inkawasi in the northern valley of the Southern Nasca Region. Pacheco, located in the Nasca Valley, was a probable Wari administrative/ceremonial center. Additional Wari-affiliated...


Ceramics, Ground Stone and Miscellanea at the Zaragoza-Oyameles Obsidian Quarry in Puebla, Mexico (2018)
DOCUMENT Citation Only Charles Knight.

One result of the intensive, 5-m interval surface survey of the Zaragoza-Oyameles obsidian source area in Puebla, Mexico was the recovery of several artifact classes suggestive of prolonged habitation. Ceramic and ground stone artifacts recovered indicate that domestic activities were an important component of the obsidian procurement and production economy. Ceramics tended to concentrate in areas that also contained higher quantities of ground stone, but did not correlate with any one stage of...


Changing Angkorian Stoneware Production Modes: Bang Kong Kiln and Thnal Mrech Kiln (2018)
DOCUMENT Citation Only Rachna Chhay. Piphal Heng. Visoth Chhay. Yukitsugu Tabata.

Stoneware ceramic production began in the 9th century CE in the Angkorian core region, and its cross-draft kiln technology, paste types, and vessel forms changed during its multi-century tradition. This paper compares kiln morphology, ceramic technology and vessel form from two Angkorian kiln sites: the 9th-11th century Bang Kong site, and the 10th-12th century Thnal Mrech. The sites are located in discrete geological regions: one in the Phnom Kulen hills (Thnal Mrech), and the other on the...


Chaîne Opératoires and Technical Identity in Aguada Portezuelo Pottery: an Approach through Ceramic Petrography (Catamarca, Argentina) (2019)
DOCUMENT Citation Only Guillermo De La Fuente.

This is an abstract from the "Cross-Cultural Petrographic Studies of Ceramic Traditions" session, at the 84th annual meeting of the Society for American Archaeology. The Aguada Portezuelo ceramic style (ca. AD 600 – AD 900) from Northwestern Argentine region, presents a highly stylistic variation and complexity in the forming techniques used by ancient potters, concerning surface treatments and the decoration applied to ceramic vessels. One of the most important features in these ceramics, is...


Chemical Composition of Maya Slips: Analysis and Interpretation of Preclassic Sherds from Holtun, Guatemala Using pXRF Technology (2018)
DOCUMENT Citation Only Anna Kebler. Michael Callaghan. Brigitte Kovacevich.

Slip, a fluid suspension of clay that is applied to the surface of a piece of ceramic, allows for increased control over the functional and aesthetic properties of the finished vessel. The potter can select a slip to provide a more appealing color, texture, and/or luster to the vessel’s surface, while maintaining the favorable functional qualities of the paste.While slip color has long been used as an attribute for classification in the Maya lowlands, only recently have the raw materials of...


Cheqoq Inka Imperial Workshop Ceramic Rims (Cusco, Peru) (2018)
DATASET Kylie Quave.

Subset of ceramics recovered at the archaeological site of Cheqoq-Maras (Urubamba, Cusco, Peru) during excavations of a Cuzco-Inka (imperial-style) pottery workshop. These data include contextual attributes, as well as rim diameters, rim thickness, and body thickness for all Cuzco-Inka rim sherds identifiable to form type. These data have been published in Quave, Kylie E. 2017. "Imperial-style ceramic production on a royal estate in the Inka heartland (Cuzco, Peru)." Latin American Antiquity 28...


Chipped Tool Production and Exchange in Late Postclassic Tlaxcallan: Integrating Specialized Production with the Political Economy of a Collective State (2017)
DOCUMENT Citation Only Marc Marino. Lane Fargher. Richard Blanton. Verenice Heredia Espinoza. John Millhauser.

Archaeological and ethnohistoric research has demonstrated that political-economic strategies in Late Postclassic (AD 1250 – 1521) Tlaxcallan were highly collective. At the same time, recent cross-cultural research indicates that collective political structures are strongly correlated with internal revenue sources, or taxes and corvée paid by free citizens. Thus, we hypothesize that Tlaxcaltecan political architects established internal revenue strategies to fund state activities. If this were...


The Chocholá Style: Expanding the Corpus, Part 2 (2023)
DOCUMENT Citation Only Maline Werness-Rude.

This is an abstract from the "SAA 2023: Individual Abstracts" session, at the 88th annual meeting of the Society for American Archaeology. Chocholá style ceramics were part of a Late Classic northern Maya complex of luxury goods that identified the social status and political affiliation of their owners. Vessels in the style are distinguished by their deeply carved iconographic panels, distinctive formatting, and unique dedicatory formulae. Their recognizability—a necessary component of the...


A Collaborative Proposal for Identifying Psychoactive Drug Ingredients in Supposed Ritual Pottery and Other Implements from the Prehispanic Andes (2021)
DOCUMENT Citation Only Detlef Wilke. Peter de Smet.

This is an abstract from the "SAA 2021: General Sessions" session, at the 86th annual meeting of the Society for American Archaeology. In recent years several studies have documented plant secondary metabolite containing residues in archaeological find material, extending the supposed utility of vessels and other implements to the ceremonial and religious-ritual domain. Inter alia cacao, coca and tobacco related compounds were identified with LC/MS/MS analytics in the nanogram scale. We...


Comparative Analysis of Imperial Inca Pottery from Ecuador using INAA (2019)
DOCUMENT Citation Only Tamara Bray. Leah Minc.

This is an abstract from the "Alfareros deste Inga: Pottery Production, Distribution and Exchange in the Tawantinsuyu" session, at the 84th annual meeting of the Society for American Archaeology. An enduring question in Inca archaeology concerns the issue of imperial pottery production. Inca ceramics, which are found across an enormous expanse of Andean South America, are known for their high degree of uniformity in vessel form, proportionality, and embellishment. How did the Inca manage the...