Republic of Hungary (Country) (Geographic Keyword)
751-775 (1,066 Records)
Seven sediment samples from the Lyukas-kurgan located near Hajdúnánás, Hungary were originally submitted for pollen analysis. Later, an additional nine samples that included sediment, ceramics, wood, a mat fragment, and a possible leather fragment were submitted for pollen, phytolith, protein, and organic residue analysis. Organic residue samples were tested using Fourier Transform Infrared Spectroscopy (FTIR).
Pompeii’s Pitfalls: The Vulnerability of Water Supply in the Wake of Natural Disasters (2024)
This is an abstract from the "The Past, Present, and Future of Water Supplies" session, at the 89th annual meeting of the Society for American Archaeology. The Roman water-supply system of Pompeii, Italy, has provided numerous insights into resource management and urbanization in the ancient Mediterranean world. It also provides a unique parallel for understanding the impacts of climate change and natural disasters on urban infrastructure today and in the past. Prior to the eruption of Mount...
Population Replacement and Radiation and the Decline of the Great Moravian State (2024)
This is an abstract from the "Life and Death in Medieval Central Europe" session, at the 89th annual meeting of the Society for American Archaeology. Great Moravia is credited by historians as the first Slavic state, existing briefly in the ninth and early tenth centuries. Internal disputes, Magyar incursions, conflicts with the Frankish Empire, and climate change events contributed to the decline and demise of the Great Moravian state. Although these events are supported by archaeological...
Population, area, and infrastructural measures for Roman cities of the Imperial period (2019)
Data analyzed in: Hanson, John W., Scott G. Ortman, Luis M. A. Bettencourt, and Liam C. Mazur (2019). Urban form, infrastructure, and spatial organization in the Roman Empire. Antiquity 93(368).
A Portable Photogrammetry Rig for the Reliable Creation of High-Quality 3D Artifact Models in the Field (2015)
3D modeling is becoming an increasingly utilized tool in archaeology. Currently, there are three principal ways of obtaining 3D models of objects: laser scanning, white light scanning, and photogrammetry. Photogrammetry is becoming increasingly popular since it is relatively inexpensive, mobile, and requires less equipment that has the possibility of malfunctioning. This poster presents a photogrammetry rig consisting of materials that can be obtained easily in the US. These include a kitchen...
Poslanstvo muzejev na prostem v sodobnosti (2003)
A synthetic study about ethnological open air museums in Europe, dealing with management, vision, mission, presentations. Article from Ph.D
Post-Mortem Interactions with Human Remains at the Covesea Caves in NE Scotland (2017)
As liminal places between the above-ground world of daily experience and the underworld, caves form a persistent focus for human engagements with the supernatural. As such they have frequently been used as places for the dead, whether as final resting places or as places of transformation. Late Bronze Age human remains were recovered from the Sculptor’s Cave, on the Moray Firth in North-East Scotland, during the 1920s and 1970s. They suggest the curation and display of human bodies and body...
Post-Mortem Interval and Age-at-Death Estimation through Forensic Proteomics (2018)
The estimation of the post-mortem interval (PMI) and the age-at-death (AAD) are both important aspects of forensic anthropology for which numerous methods have been developed, each with different limitations. As proteins represent biomolecules that carry out a wide range of functions, many of which structural to the tissues undergoing decomposition, and the collection of these (i.e., the proteome) is dynamic not only throughout life, but also post-mortem, proteomic methods have great potential...
Post-Mortem Manipulation, Movement, and Memory in Copper Age Iberia (2017)
Post-mortem manipulation of human remains played a critical role in mortuary practices in Copper Age Iberia (c. 3250-2200 BC). During this period in Spain and Portugal, individuals were buried communally in tholos-type tombs, as well as natural or artificial caves and rock shelters. Evidence from across Iberia suggests that mortuary practices included the manipulation and movement of previously interred bodies, either in order to clear space for new individuals, or to facilitate secondary...
(Poster) Unlocking the data behind the Chora of Metaponto publication series: "on-the-fly" solutions for sharing and archiving an evolving collection (2015)
Archaeological publishing is moving from the traditional model of the print monograph (as the definitive word), to an open and interactive model in which it is expected that primary data and the processes of their collection and interpretation are exposed for the reader to validate, re-use, and reinterpret. Online representation of archaeological data and research, then, must achieve transparency, exposing the relations between field collection and research methods, data objects, metadata, and...
The Potential for Georeferenced Spatial Data on Coastal Erosion Sites (2017)
Coastal erosion sites contain the same complexity as any other site; however, the sequences are often truncated and the recovery conditions require adaptive approaches. Although these sites are eroding, there is a need for equal rigor in their recording. The coastal erosion site at Swandro, Rousay, Orkney, has been recorded using a variety of georeferenced data sets. This paper examines the potential of micro-analysis of the 3-dimensional coordinate records of artifacts and geo-referenced...
Pottery Production at Idalion, Cyprus: Investigating First Millennium BCE Politics and Culture through Ceramic Petrography. (2018)
On the island of Cyprus, the first millennium BCE was a period of change in politics and culture brought about by new people, new governance, and new technology. This paper attempts to analyze these changes using one site. Idalion is located in the east-central part of the island. The polity went through many changes from its founding, c. 1200 BCE, through the first millennium BCE and I have begun to investigate some through petrographic analysis of pottery. Pottery production can represent...
Powerful Objects: Traditional Beliefs about Neolithic Axes and Knives in Shetland (2017)
In the Shetland islands off the north coast of Scotland there was major exploitation of a lithic source known as riebeckite felsite during the Neolithic period. This source provided the raw material for the majority of stone axes known from the archipelago and also for objects known as Shetland knives. At the source, North Roe, mainland Shetland intrusive dykes of felsite occur in granite. Integrated, multi-scalar survey and excavation by the North Roe Felsite Project has demonstrated that some...
Praxis Makes Perfect? The Archaeological Correlates of Social Failure in Minoan Crete (2024)
This is an abstract from the "The Archaeology of Failure" session, at the 89th annual meeting of the Society for American Archaeology. In a 2017 paper on architectural failures in Minoan Crete I suggested that these reflected a greater focus on signification than on engineering. Still failures, as drains that need refitting and paving that needs replacing cannot be seen otherwise; but a deeper, more nuanced understanding of the underlying purpose of these projects provides insight into...
Prehistoric farming in Europe (1985)
This resource is a citation record only, the Center for Digital Antiquity does not have a copy of this document. The information in this record has been migrated into tDAR from the EXARC Bibliography, originally compiled by Roeland Paardekooper, and updated. Most of these records consist of a document citation and other metadata but do not have the documents themselves uploaded. If you have a digital copy of the document and would like to have it curated in tDAR, please contact us using the...
Prehistoric Obsidian Use in Southern Italy: Primary Acquisition and Down-the-line Exchange in Calabria, Basilicata, and Campania (2018)
Obsidian was a significant component of daily life in southern Italy during the Neolithic period (ca. 6000-3000 BC). Intensive surveys by Ammerman and colleagues in the 1970s identified a widespread presence of Neolithic obsidian in Calabria, generally thought to have come from the island of Lipari, mostly on the basis of its being the closest, along with general visual characteristics. While it was also thought possible to have small amounts of obsidian from the further away tiny island of...
Prehistoric pottery production and distribution in the Shkodër region of northern Albania (2017)
The aim of my poster is to present new provenience data regarding pottery sherds from several prehistoric archaeological sites in Shkodër, Albania. The pottery samples to be analyzed are from survey and excavation and were collected by the Shkodra Archaeological Project (PASH). Pots appear to have played important social and economic roles in Shkodër, but we do not yet know where they were made. Previous studies based on stylistic analysis refer to the large hill fort site of Gajtan as a center...
A Preliminary Overview of the Lithic Raw Material Outcrops Southeast of Crvena Stijena (Area of Vilusi–Grahovo–Boka Kotorska), Montenegro (2023)
This is an abstract from the "The Late Middle Paleolithic in the Western Balkans: Results from Recent Excavations at Crvena Stijena, Montenegro" session, at the 88th annual meeting of the Society for American Archaeology. The Crvena Stijena rockshelter is located on the Banjani Karst Plateau in westernmost Montenegro. Excavations at one of the longest human occupation sequences in the Balkans yielded 20 Middle Paleolithic layers containing numerous artifacts and faunal remains. Recent...
Preservation and Perception: Archaeobotanical Patterning and Site Formation Processes in Mycenaean Messenia (2018)
Despite the increased application of spatially intensive sampling for archaeobotanical remains at large Mycenaean sites in Greece, the recovered assemblages are typically small and show poor preservation. Here, we consider the macrobotanical assemblage recovered through flotation of more than 7000 L of sediment at the site of Iklaina, in Messenia, in conjunction with microbotanical remains (starches, phytoliths) to illuminate cultural and natural site formation processes that have either...
Producing Knowledge Through the Production of 3D Digital Artifacts (2017)
It is becoming more common to see 3D digital artifacts used for analysis and interpretation, often as if these digital forms are equivalent to the original. This paper discusses the process of creating a 3D model as an essential but often under considered aspect of the final product that should be taken into consideration in their use in any archaeological analysis and interpretation. Digital artifact models inhabit a strange place amongst the suite of traditional archaeological data – their...
Profiling the Past: About the Importance of Excavating Side View and Sieving with a Small Mesh for Retrieving Blade/Bladelet Production in Middle Paleolithic and Early Upper Paleolithic Contexts (2023)
This is an abstract from the "Developing Paleolithic Excavation Methods for the Twenty-First Century" session, at the 88th annual meeting of the Society for American Archaeology. Excavation involves working both in side-view (i.e., with profiles), to recognize the stratigraphy, and in plan-view to excavate features and layers. Here we want to elaborate on the advantages of working mainly in side-view at Paleolithic sites with long, complex stratigraphies with high find densities. Sieving is...
The Proximity of Communities to the Expanse of Big Data (2019)
This is an abstract from the "Archaeological Vision in the Age of Big Data" session, at the 84th annual meeting of the Society for American Archaeology. While members of the communities living near or on archaeological sites have frequently been hired around the world to dig on archaeological excavations, they have very rarely participated in the recording or documentation of those excavations. They have played even less of a role in designing the structures of either paper or electronic data...
Putting the Mold to the Test: The Application of Experimental Archaeology to Compare the Mold and Potter’s Wheel in Bronze Age Anatolia (2019)
This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. Moving across Syria-Mesopotamia to Anatolia and finally to the Aegean, potters during the Bronze Age gradually began to shift their ceramic repertoire from hand-made and coil-made ceramics to wheel-made pottery. Despite this rise in innovative manufacturing technology (the potter’s wheel), some sites in Western Anatolia, namely Seyitömer Höyük, exhibit...
PXRF Analysis of the Pylos Linear B Tablets (2017)
PXRF Analysis of the Pylos Linear B Tablets In 2015 and 2016 I analyzed all of the Mycenaean Linear B clay tablets and sealings from the Palace of Nestor at Pylos for their chemical composition using a portable X-Ray Fluorescence Spectrometer. Sealings were used on containers of oil, wine, etc., and on baskets of tablets. Leaf-shaped tablets usually contain one entry or line of information. Page-shaped tablets contain several entries of related information. There are questions that these...
Qajaq: Kayaks of Siberia and Alaska (1986)
This resource is a citation record only, the Center for Digital Antiquity does not have a copy of this document. The information in this record has been migrated into tDAR from the EXARC Bibliography, originally compiled by Roeland Paardekooper, and updated. Most of these records consist of a document citation and other metadata but do not have the documents themselves uploaded. If you have a digital copy of the document and would like to have it curated in tDAR, please contact us using the...