Digital Archaeology: 3D Modeling (Other Keyword)

26-50 (123 Records)

A Case Study in the Use of Photogrammetry for Management, Public Outreach, and Research Potential (2019)
DOCUMENT Citation Only Adesbah Foguth.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. Photogrammetry has become increasingly relevant in the field of archaeology as digital software becomes more accessible, with the increased ease in which archaeological sites can be recorded three-dimensionally, and with the ease in which it can be added to regular field work with minimal monetary costs or time. Despite current interest in 3D technology, the...


Communicating in Three Dimensions: Questions of Audience and Reuse in 3D Excavation Documentation Practice (2018)
DOCUMENT Citation Only Adam Rabinowitz. Iulian Bîrzescu.

After excavating the Praedia of Iulia Felix at Pompeii in 1755, architect Karl Weber published the building with an axionometric illustration that showed the remains in three-dimensional perspective. In doing so, Weber communicated additional information about the form of the building in a manner that was both accessible to a lay audience and sufficiently "scientific" for a scholarly one. By contrast, digital 3D documentation methods in current archaeological practice often reinforce a division...


Comparing a NextEngine 3D Scanner with Casting Mediums for Making Positives of Cord-Impressed Pottery (2018)
DOCUMENT Citation Only Nicole Bodenstein.

In this paper, I compare using latex and Sculpey molds with a NextEngine 3D scanner in creating positive copies of upper midwestern, Late-Woodland, cord-impressed pottery for analysis. Making cast positives of these impressions in casting mediums present different hazards to the sherd. A NextEngine 3D Scanner may present fewer hazards to sherds, while allowing for digital copies that are easily manipulated and measured. It is also portable and relatively inexpensive compared to other 3D scanning...


The Cooperative Future of Archaeology and 3D Terrestrial Scanning (2019)
DOCUMENT Citation Only Jeremiah Perkins. Cambria Haley. David Klamm.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. Over the past two summers at the archaeological excavation of Etzanoa we used a Leica P40 scanner to create 3-D models of the excavation units. The accuracy of the measurements is + 1 mm. It is possible to take measurements of features and object from the model. The scanner has some limitations for recording deep excavations, and a novel method for overcoming...


Cosmology and Lunar Calendar of a Prehistoric Rice Farming Society in Japan: An Experimental Simulation with arcAstroVR (2024)
DOCUMENT Citation Only Akira Goto. Kazuhiro Sekiguchi. Kuninori Iwashiro. Yoshitaka Hojo.

This is an abstract from the "Ancient Landscapes and Cosmic Cities out of Eurasia: Transdisciplinary Studies with New Lidar Mapping" session, at the 89th annual meeting of the Society for American Archaeology. In Japanese prehistory, the foraging of the Jomon economy was followed by the Yayoi period, which was based on rice cultivation and metal tools introduced from China. During the Yayoi period, social stratification developed, and small chiefdoms arose in western Japan. According to...


Creating 3D Models of Artifacts and Features using Photogrammetry (2018)
DOCUMENT Citation Only Robert Gardner. Robert Hard.

During the 2015 and 2016 University of Texas at San Antonio Field Schools we made use of new low-cost photogrammetry techniques to document metates and rock ring features at Early Agricultural period sites along the Upper Gila River in southeastern Arizona. We systematically photographed a number of ground stone tools and rock ring features using point-and-shoot cameras. These photos were then processed using Agisoft’s Photoscan software to produce colored 3D computer renders of the artifacts...


The Crop Fields of the Ramaditas: A Formative Site in the Atacama Desert (2024)
DOCUMENT Citation Only Gentaro Miyano. Mario Rivera.

This is an abstract from the "Water Management in the Andes: Past, Present, and Future" session, at the 89th annual meeting of the Society for American Archaeology. Ramaditas, a Formative village site dated to around 600 BC, is located in the driest section of the Atacama Desert. Surrounding the architectural structures is a large area of fields that were cultivated by the inhabitants of Ramaditas. Here we present aspects concerning the water system developed at Ramaditas based on an aerial...


Cultural Resource Protection in Iowa Using Hand-Held LiDAR Technology (2019)
DOCUMENT Citation Only Lara Noldner. Brennan Dolan. Janee Becker.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. A primary focus of cultural resource protection in Iowa is on prehistorically constructed burial mounds and other earthworks that are important to Native communities, past and present. This involves monitoring the condition of these earthworks and considering all potential impacts given their location and landowner maintenance strategies. This poster...


Decoding Knudson’s Flintknappers: A 3D Model Analysis of the Plainview Bison Kill Projectile Points (2021)
DOCUMENT Citation Only Stance Hurst. Eileen Johnson.

This is an abstract from the "Paleo Lithics to Legacy Management: Ruthann Knudson—Inawa’sioskitsipaki" session, at the 86th annual meeting of the Society for American Archaeology. Excavated in the mid-1940s, the Plainview site on the Southern High Plains generated considerable interest and continues to do so today. After hours spent illustrating each flake scar of the Plainview (41HA1) bison kill site’s lithic assemblage, Knudson stated in her 1973 dissertation that “perhaps only one and at...


Defining the Spatial Structure of Rock Art in 12th Unnamed Cave, Tennessee, through 3D Modeling and GIS (2024)
DOCUMENT Citation Only Jordan Schaefer.

This is an abstract from the "Interdisciplinary Approaches to Rock Art Documentation, Research, and Analysis" session, at the 89th annual meeting of the Society for American Archaeology. Twelfth Unnamed Cave is a dark-zone cave art site in Tennessee that contains over 300 individual petroglyphs. Like many cave art sites in the American Southeast, the locations of the art within the cave appear to be structured. However, traditional spatial analytical methods have made it difficult to...


Demarcating Space and Creating Place: Examining the Processes for Creating Sacred Landscapes by the Ancient Maya of Western Belize (2023)
DOCUMENT Citation Only Jessica Ratcliffe.

This is an abstract from the "SAA 2023: Individual Abstracts" session, at the 88th annual meeting of the Society for American Archaeology. The ancient Maya of the Belize River Valley maintained a strong, spiritual connection with nature, one that can be explored through the layers of religious symbolism imbued into their built environments. In Xunantunich during the Late Classic period, the Maya created a sacred space by incorporating symbols—such as stelae, altars, and cache deposits—into...


Digital Methods for Conservation in Underground Archaeological Contexts: A Case Study from the Copan Acropolis (2019)
DOCUMENT Citation Only Laura Lacombe. Amy Thompson. William Fash. Loa Traxler.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. As site documentation methods become more high-tech and data-heavy, it raises issues of repeatability, access, and expense. In the case of the 3 kilometers of circuitous archaeological tunnels at the Classic Maya site of Copan, Honduras, it was imperative to document them in a manner that would be accurate, efficient, and accessible not only to scholars with...


Digital Preservation Era: A Toolbox for Archaeologists to Transition into the Digital Age (2018)
DOCUMENT Citation Only Jonathan Roldan. Marisol Cortes-Rincon. Abby Barrios.

Digital tools, such as photogrammetry and virtual environments have been around for decades. However, it was not until the past decade that the academic community introduced such tools into their work and have taken such discipline seriously. For this reason, the practice, management, teaching and potential of digital archaeology has remained a lagging field. As a response, this paper will provide a guide for traditional archaeologists to assist in the transition to the digital medium. An...


Documentation, methodology and interpretation of rock art from Castle Rock Community, Canyons of the Ancients National Monument, Colorado (2018)
DOCUMENT Citation Only Radoslaw Palonka.

Thirteenth century A.D. in the central Mesa Verde region was a time of socio-cultural transformations, climatic changes, and increasing conflicts and violence that took place shortly before the final depopulation of the region. Since 2011 the Sand Canyon-Castle Rock Community Archaeological Project is being conducted and it focuses on the analysis and reconstruction of the settlement and social structure in a community of forty Ancient Pueblo sites dated to the thirteenth century. The project...


Envisioning the Iconographic and Epigraphic Corpus of Cerro de las Mesas (2023)
DOCUMENT Citation Only Joshua Englehardt. Michael Carrasco.

This is an abstract from the "Coffee, Clever T-Shirts, and Papers in Honor of John S. Justeson" session, at the 88th annual meeting of the Society for American Archaeology. In this paper, we honor John Justeson’s contributions to the study of Mesoamerican writing and symbolic systems by revisiting the Epi-Olmec corpus of Classic period Cerro de las Mesas (300–900 CE). Four of the stelae from this site contain examples of the Epi-Olmec script, and their accompanying iconographic programs make...


Ersersaaneq Project: Creating Knowledge Through Images (2018)
DOCUMENT Citation Only Malu Fleischer. Michael Nielsen.

In 2016, the Ersersaaneq project was instigated by three students from the University of Greenland to create an online repository of 3D models of the Gustav Holm collection. In Greenlandic the word ersersaaneq captures the idea of producing knowledge through the creation of visual images. The goal is to digitally re-unify parts of the collection and develop coherency within a global context. Project partners include Greenland National Museum, The Smithsonian Institution and The National Museum...


The Establishment of the First 3D Fish Bone Reference Collection in China (2019)
DOCUMENT Citation Only Chong Yu.

This is an abstract from the "Zooarchaeology and Technology: Case Studies and Applications" session, at the 84th annual meeting of the Society for American Archaeology. Zooarchaeological researchers in China have previously focused on mammal remains, as have many places around the world. However, mammal species are only one part of the animal resources that people used in ancient times, especially in the areas by water. Young zooarchaeologists have begun to get involved in the work of...


Examining the Architectural Technology at Lava Ridge Ruin, Arizona (2019)
DOCUMENT Citation Only Benjamin Van Alstyne.

This is an abstract from the "Archaeology of the Grand Canyon-Parashant National Monument" session, at the 84th annual meeting of the Society for American Archaeology. One component of the archaeological record that can shed light on human behavior is architectural remains. Architectural studies in archaeology have mostly focused on evaluating the mechanical properties of construction materials, the amount of labor, time, and materials needed for construction, and room function to make...


Experimental Use of 3-D Data to Predict the Risk of Slumping at Monks Mound, Cahokia (2019)
DOCUMENT Citation Only Michael Hargrave. Carey Baxter.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. Monks Mound is the largest prehistoric mound north of Mexico, and is arguably the Cahokia World Heritage Site’s most dramatic monument. Major slumps that occurred in 2007 did significant damage to the mound. Repair of the slumped area revealed a complex stratigraphy, multiple features, and evidence for previous prehistoric and historic slumps. Mounds, like...


Exploring the Use of 3D Technologies, Virtual Reality, and Immersive Media in Public Archaeology to Advance Awareness of Material Culture across Social Media Platforms (2018)
DOCUMENT Citation Only Phillip Ashlock. Dawn Ashlock.

With the increasing issues surrounding access to remote sites, record low attendance of traditional museum settings, and trends involving greater interaction with social media platforms among upcoming generations, this poster presentation attempts to explore the use of 3D technologies, virtual reality (VR), and immersive media in Public Archaeology to advance awareness of material culture across social media platforms. These methods provide the ability to disseminate content to the public en...


The Fast and the Furious. Innovations in Archaeological Visualisations at the Beginning of the 21st Ct. (2018)
DOCUMENT Citation Only Petr Kvetina. Jiri Unger.

The aim of the paper is to discuss current possibilities of complex approach to 3D virtual presentation of archaeological information, both to public and professional archaeologists. Virtual archaeology including 3D objects, reconstruction of building structures and even past landscape scenes has been for several years a standard and specific way of documentation and interpretation. However, what is currently changing is the general availability of the necessary technologies. A common feature of...


Figuring Things Out: 3D Models of Valdivia Figurines for Research and Outreach (2018)
DOCUMENT Citation Only Guy Duke. Sarah Rowe. Brandi Reger.

During excavations at the Valdivia site of Buen Suceso, Ecuador, in 2017 we recovered a number of figurines. Using in-field photogrammetry and post-field processing, we have created digital 3D models of these figurines. For us, the purpose of photogrammetric models is: 1) to facilitate comparisons across assemblages by a variety of scholars, and 2) for use in public education and outreach. While the creation of 3D images via photogrammetry is becoming more common in archaeological practice, the...


Fish Body Size and Ancestral Pueblo Foraging Decisions in New Mexico, ca. AD 1350–1600 (2021)
DOCUMENT Citation Only Jonathan Dombrosky.

This is an abstract from the "Animal Bones to Human Behavior" session, at the 86th annual meeting of the Society for American Archaeology. Small numbers of fish remains are frequently recovered from Pueblo IV (AD 1350–1600) sites in the Middle Rio Grande basin of central New Mexico, but they are rare during earlier time periods. Increased aquatic habitat quality during this time could have increased fish body size and the energy obtained by Ancestral Puebloan fishers could have been...


From the Lab to the Cave and Back: 3D Modeling Finger Flutings (2019)
DOCUMENT Citation Only Cindy Hsin-yee Huang.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. Finger flutings are lines and markings drawn with the human hand in soft sediments in caves and rock shelters throughout southern Australia, New Guinea, and southwestern Europe that date back to the Late Pleistocene. Over the last two decades, Kevin Sharpe and Leslie Van Gelder developed a method to determine characteristics of the creators, such as age, sex...


A Geometric Morphometric Analysis of Projectile Point Maintenance using Experimental Resharpening Techniques: An Examination of PFP1 Curation, Cooper's Ferry Site, Idaho (2019)
DOCUMENT Citation Only Sarah Skinner.

This is an abstract from the "SAA 2019: General Sessions" session, at the 84th annual meeting of the Society for American Archaeology. The implementation of controlled experiments to identify and describe the behaviors of the past has been influential in understanding the material evidence left behind in the archaeological record. This in combination with the advent of new 3D scanning technologies and geometric morphometric analysis methods can be used to establish novel approaches to topics...