Livingston Management Group, Pinto Creek Complex Data: Ceramic Bowl and Jar Data from Screened Contexts

Part of the Roosevelt Platform Mound Study: Pinto Creek Complex, Livingston Area Sites, Pillar Mound, Pinto Point Sites, Pinto Point Mound (DRAFT) project

Creator(s): Archaeological Research Institute, Arizona State University

Year: 1997

Summary

The Livingston Data tables provide a summary of the artifacts recovered during Arizona State University (ASU), Office of Cultural Resource Management's (OCRM) Roosevelt Platform Mound Study (RPMS) research at 52 sites located in four study areas in the bajadas and foothill-transition zone that surround and define the Tonto Basin. The Livingston Data table Ceramic Bowls and Jars from All Contexts presents a summary of the basic ceramic vessel forms - bowls and jars - recovered from excavated, screened contexts at Livingston Data sites.

The table lists archaeological sites and designated archaeological contexts - strata - at each site. The strata represent major natural or cultural depositional events such as erosional fill, roof fall, floor contexts, and sterile substrate. Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. In this table, the archaeological contexts - strata - are identified by a combination of numbering systems: the ASM site number, a colon, the feature number, and the stratum letter designation (EX: U:3:198:006A, U:3:198:006B). Within a feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The letters are assigned in descending order. Mixed levels and artifacts collected out of context are designated by a "?". Artifacts from each feature (or mixed context) are tallied according to strata. Please see column metadata for further detail.

The table then provides the frequency (count) of distinct ceramic bowls and jars assigned to different decorated ceramic types for each stratum. Note that the table presents a count of distinct vessels (i.e., groups of sherds or single sherds assigned to individual vessels) identified to decorated ceramic type. More specifically, it presents a count of rim sherds that were assigned to a single vessel (The Stage 2 Ceramic Decorated/Intrusive analysis examined rim sherds to determine vessel form and ceramic type for individually designated vessels).

This data was originally published in the Roosevelt Platform Mound Monograph Series No. 3 as an appendix. See the report at the following tDAR URL:

https://core.tdar.org/document/398709/archaeology-of-the-salado-in-the-livingston-area-of-tonto-basin-roosevelt-platform-mound-study-report-on-the-livingston-management-group-pinto-creek-complex-part-1

https://core.tdar.org/document/394285/archaeology-of-the-salado-in-the-livingston-area-of-tonto-basin-roosevelt-platform-mound-study-report-on-the-livingston-management-group-pinto-creek-complex-part-2

Cite this Record

Livingston Management Group, Pinto Creek Complex Data: Ceramic Bowl and Jar Data from Screened Contexts. Archaeological Research Institute, Arizona State University. Tempe, Arizona: Office of Cultural Resource Management, Arizona State University. 1997 ( tDAR id: 398626) ; doi:10.6067/XCV8639RSX

This Resource is Part of the Following Collections

Data Set Structure

Measurement Column
Count Column
Coded Column
Filename Column
Integration Column (has Ontology)

Table Information: LivingstonPart2Page9351

Column Name Data Type Type Category Coding Sheet Ontology Search
Site The archaeological sites from which the ceramic bowls and jars were recovered. In this table, sites are identified by an Arizona State Museum (ASM) site number. Arizona State Museum numbers begin with the designation "AZ." They then use a three-part numbering system. A letter, beginning with "A" and continuing to "FF", designates one of many arbitrary rectangles that divide the state into rectangular units, each of which includes 16 U.S.G.S topographic maps in a 15-minute series. The letter is followed by a number that refers to a 15-minute series map in a given rectangular unit. The numbers begin with 1 in the northwest corner and continue to 16 in the southeast corner. The map number is followed by a site number, which are allocated sequentially within a 15-minute series map. Each of these elements are separated by colons. At the end of the number, it is customary to provide a short-hand for the state institution that assigned the number (e.g., ASM, ASU, NAU), as several institutions have assigned site numbers throughout Arizona. EX: AZ U:8:23(ASM) Site AZ U:8:23(ASM) also has a a Tonto National Forest site number: AR-03-12-06-177. Please see the Roosevelt Platform Mound Study Site Concordance Table to match the ASM number(s) to the Tonto National Forest number(s).
VARCHAR  Uncoded Value Provenience and Context : Site none none true
Other Plain Bowl Frequency of individual vessels that were identified to different plain wares, other than Salado Red Ware, and identified as bowls. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
DOUBLE  Uncoded Value Ceramic : Count none none true
Other Decorated Jar Frequency of individual vessels that were identified to different ceramic decorated wares, other than Roosevelt Red Ware, and identified as jars. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Other Decorated Bowl Frequency of individual vessels that were identified to different ceramic decorated wares, other than Roosevelt Red Ware, and identified as bowls. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
VARCHAR  Uncoded Value Ceramic : Count none none true
Roosevelt Redware Jar Frequency of individual vessels that were identified to the ceramic ware Roosevelt Red Ware and identified as jars. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Other Plain Jar Frequency of individual vessels that were identified to different plain wares, other than Salado Red Ware, and identified as jars. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Salado Red Jar Frequency of individual vessels that were identified to the ceramic ware Salado Red Ware and identified as jars. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Salado Red Bowl Frequency of individual vessels that were identified to the ceramic ware Salado Red Ware and identified as bowls. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Roosevelt Redware Bowl Frequency of individual vessels that were identified to the ceramic ware Roosevelt Red Ware and identified as bowls. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Stratum Identifies a major natural or cultural depositional event such as erosional fill, roof fall, floor contexts, and sterile substrate (i.e., a single archaeological context in both horizontal and vertical space). Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. This table contains data from multiple sites with multiple features and associated strata. Thus, in this table, a stratum is identified by combining several numbering systems: an ASM site number, a colon, a feature number, and a stratum letter designation. EX: U:3:198:006A, U:3:198:006B A stratum is a combination of an individual feature and a context in or associated with that feature. For example, Feature 10 might be a structure with an erosonial fill stratum, a roof fall stratum, a floor stratum, and a sterile substrate stratum. Within each feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The levels excavated in a feature were aggregated into individual feature strata (e.g., Levels 1 - 3 = Stratum A). A feature's stratum letters are assigned in descending order. A context letter of "?" designates a mixed level or context or artifacts collected out of context. Examples: 0? = General Cultural Fill/No Feature and Indeterminate context 10A = Feature 10 and Context A 10B = Feature 10 and Context B 10C = Feature 10 and Context C 22? = Feature 22 and Mixed and/or Undefined context 22A - Feature 22 and Context A Each stratum (e.g., 10C) is assigned to a stratum type. The stratum data are presented in separate strata data tables. Artifacts collected from each feature are tallied according to strata. For example, artifacts collected from Feature 10 are tallied for Stratum A, Stratum B, Stratum C, etc.
VARCHAR  Uncoded Value Provenience and Context : Stratum none none true

Keywords

Culture
Hohokam • Salado

Material
Ceramic

Site Name
AR-03-12-06-1007(USFS) • AR-03-12-06-1011(USFS) • AR-03-12-06-1012(USFS) • AR-03-12-06-1013(USFS) • AR-03-12-06-1015(USFS) • AR-03-12-06-15a(USFS) • AR-03-12-06-15b(USFS) • AR-03-12-06-700(USFS) • AR-03-12-06-995(USFS) • AR-03-12-06-997(USFS) • AR-03-12-06-999(USFS) • AZ V:5:111(ASM) • AZ V:5:112(ASM) • AZ V:5:119(ASM) • AZ V:5:121(ASM) • AZ V:5:125(ASM) • AZ V:5:128(ASM) • AZ V:5:130(ASM) • AZ V:5:139(ASM) • AZ V:5:140(ASM) • AZ V:5:141(ASM) • AZ V:5:66(ASM) • AZ V:5:76(ASM)

Site Type
Domestic Structures • Factory / Workshop • Funerary and Burial Structures or Features • Mound / Earthwork • Plaza

Investigation Types
Architectural Documentation • Data Recovery / Excavation • Heritage Management

Geographic Keywords
Arizona (State / Territory) • North America (Continent) • Pinto Creek Complex • Theodore Roosevelt Lake • Tonto Basin • United States of America (Country)

Temporal Keywords
Gila Phase • Hohokam Classic period • Hohokam pre-Classic period • Miami Phase • Roosevelt Phase

Spatial Coverage

min long: -111.007; min lat: 33.623 ; max long: -110.951; max lat: 33.671 ;

Individual & Institutional Roles

Contact(s): USDI Bureau of Reclamation, Phoenix Area Office

Contributor(s): Owen Lindauer; Peter H. McCartney; Judi L. Cameron; J. Phil Dering; Suzanne K. Fish; Carol A. Griffith; Joel D. Irish; John C. Ravesloot; Marcia H. Regan; Kim S. Savage; M. Steven Shackley; Katherine A. Spielmann; Christy G. II Turner

Lab Director(s): Arleyn W. Simon

Principal Investigator(s): Glen E. Rice; Charles Redman

Sponsor(s): USDI Bureau of Reclamation, Phoenix Area Office

Prepared By(s): Office of Cultural Resource Management, Arizona State University

Submitted To(s): USDI Bureau of Reclamation, Phoenix Area Office

Record Identifiers

Roosevelt Monograph Series(s): 3

Anthropological Field Studies(s): 32

Bureau of Reclamation Contract No.(s): 9-CS-32-06230

File Information

  Name Size Creation Date Date Uploaded Access
livingston_screened_bowl_and_jar.xls 104.00kb May 19, 2015 2:36:51 PM Public
  • Translated version livingston_screened_bowl_and_jar_translated.xls (68.50kb)
    Data column(s) in this dataset have been associated with coding sheet(s) and translated: