Livingston Data, AZ V:5:112 (ASM): Strata

Part of the Roosevelt Platform Mound Study: Pinto Creek Complex, Livingston Area Sites, Pillar Mound, Pinto Point Sites, Pinto Point Mound (DRAFT) project

Creator(s): Archaeological Research Institute, Arizona State University

Year: 1997

Summary

The strata represent major natural or cultural depositional events such as erosional fill, roof fall, floor contexts, and sterile substrate. Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. Within a feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The letters are assigned in descending order. Mixed levels and artifacts collected out of context are designated by a "?". Artifacts from each feature (or mixed context) are tallied according to strata. Please see column metadata for further detail.

Cite this Record

Livingston Data, AZ V:5:112 (ASM): Strata. Archaeological Research Institute, Arizona State University. Tempe, Arizona: Office of Cultural Resource Management, Arizona State University. 1997 ( tDAR id: 398863) ; doi:10.6067/XCV82B9129

This Resource is Part of the Following Collections

Data Set Structure

Measurement Column
Count Column
Coded Column
Filename Column
Integration Column (has Ontology)

Table Information: LivingstonPart2Table11.2Page341

Column Name Data Type Type Category Coding Sheet Ontology Search
Type Identifies the feature type for each feature. In addition, identifies the stratum type for each stratum in and/or associated with a feature. Examples: Feature 10 = Cobble Masonry Room (feature type) Stratum 10? = unassigned contexts in Cobble Masonry Room, Feature 10 Stratum 10B = roof fall in Cobble Masonry Room, Feature 10
VARCHAR  Uncoded Value Provenience and Context : Feature Type none none true
Feature Identifies the assigned feature number for each identified feature.Feature numbers begin with 1 at each site and increase sequentially (e.g., 10, 11, 12).
BIGINT  Uncoded Value Provenience and Context : Feature ID/Number none none true
Stratum Identifies a major natural or cultural depositional event such as erosional fill, roof fall, floor contexts, and sterile substrate (i.e., a single archaeological context in both horizontal and vertical space). Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. A stratum is a combination of an individual feature and a context in or associated with that feature. For example, Feature 10 might be a structure with an erosonial fill stratum, a roof fall stratum, a floor stratum, and a sterile substrate stratum. Within each feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The levels excavated in a feature were aggregated into individual feature strata (e.g., Levels 1 - 3 = Stratum A). A feature's stratum letters are assigned in descending order. A context letter of "?" designates a mixed level or context or artifacts collected out of context. Examples: 0? = General Cultural Fill/No Feature and Indeterminate context 10A = Feature 10 and Context A 10B = Feature 10 and Context B 10C = Feature 10 and Context C 22? = Feature 22 and Mixed and/or Undefined context 22A - Feature 22 and Context A Each stratum (e.g., 10C) is assigned to a stratum type. Examples: 10A = Feature 10 and Context A = Feature 10, erosional fill 10B = Feature 10 and Context B = Feature 10, roof fall 10C = Feature 10 and Context C = Feature 10, floor Some strata are associated with one or more subfeatures. Please see the Associated Subfeatures columns.
VARCHAR  Uncoded Value Provenience and Context : Stratum none none true
Screened Volume (m^3) Measurement of the volume (in cubic meters) of fill that was screened from a designated stratum. The measure is 0.00 if no fill was screened from a stratum (i.e., The context or feature fill was not screened.).
DOUBLE  Uncoded Value Provenience and Context : Volume none none true
Total Volume (m^3) Measurement of the volume (in cubic meters) of total fill in a designated stratum.
DOUBLE  Uncoded Value Provenience and Context : Volume none none true
Associated Subfeatures Identifies the subfeatures associated with each feature -- often each feature stratum. A subfeature is designated by the associated feature number and an assigned subfeature decimal number (e.g., 10.01, 10.02, 10.03). Subfeature numbers begin with .01 for each associated feature and increase sequentially. Also identifies the subfeature type. Each subfeature is labeled with the assigned subfeature type, to the right of the subfeature number. Examples: 10.04 Timber = a timber subfeature associated with Feature 10 10.05 In-Place Vessel = an in-situ vessel associated with Feature 10 10.06 Roof Fall = well-defined roof fall in association with Feature 10 Note that subfeatures are frequently associated with a particular stratum within a feature. For example, subfeatures 10.04, 10.05, and 10.06 may be associated with Stratum 10C. Other subfeatures may be associated with Stratum 10D, etc.
VARCHAR  Uncoded Value Provenience and Context : Feature ID/Number none none true
Associated Subfeatures Identifies the subfeatures associated with each feature -- often each feature stratum. A subfeature is designated by the associated feature number and an assigned subfeature decimal number (e.g., 10.01, 10.02, 10.03). Subfeature numbers begin with .01 for each associated feature and increase sequentially. Also identifies the subfeature type. Each subfeature is labeled with the assigned subfeature type, to the right of the subfeature number. Examples: 10.04 Timber = a timber subfeature associated with Feature 10 10.05 In-Place Vessel = an in-situ vessel associated with Feature 10 10.06 Roof Fall = well-defined roof fall in association with Feature 10 Note that subfeatures are frequently associated with a particular stratum within a feature. For example, subfeatures 10.04, 10.05, and 10.06 may be associated with Stratum 10C. Other subfeatures may be associated with Stratum 10D, etc.
VARCHAR  Uncoded Value Provenience and Context : Feature ID/Number none none true

Keywords

Culture
Hohokam • Salado

Material
Ceramic • Chipped Stone • Dating Sample • Fauna • Ground Stone • Human Remains • Macrobotanical • Pollen • Shell

Site Name
AR-03-12-06-995(USFS) • AZ V:5:112(ASM)

Site Type
Domestic Structures • Factory / Workshop • Funerary and Burial Structures or Features • Mound / Earthwork • Plaza

Investigation Types
Architectural Documentation • Data Recovery / Excavation • Heritage Management

Geographic Keywords
Arizona (State / Territory) • North America (Continent) • Pinto Creek Complex • Theodore Roosevelt Lake • Tonto Basin • United States of America (Country)

Temporal Keywords
Gila Phase • Hohokam Classic period • Pre-Roosevelt Phase • Roosevelt Phase • Sedentary Period

Spatial Coverage

min long: -111.007; min lat: 33.623 ; max long: -110.951; max lat: 33.671 ;

Individual & Institutional Roles

Contact(s): USDI Bureau of Reclamation, Phoenix Area Office

Contributor(s): Owen Lindauer; Peter H. McCartney; Judi L. Cameron; J. Phil Dering; Suzanne K. Fish; Carol A. Griffith; Joel D. Irish; John C. Ravesloot; Marcia H. Regan; Kim S. Savage; M. Steven Shackley; Katherine A. Spielmann; Christy G. II Turner

Lab Director(s): Arleyn W. Simon

Principal Investigator(s): Glen E. Rice; Charles Redman

Sponsor(s): USDI Bureau of Reclamation, Phoenix Area Office

Prepared By(s): Office of Cultural Resource Management, Arizona State University

Submitted To(s): USDI Bureau of Reclamation, Phoenix Area Office

Record Identifiers

Roosevelt Monograph Series(s): 3

Anthropological Field Studies(s): 32

Bureau of Reclamation Contract No.(s): 9-CS-32-06230

File Information

  Name Size Creation Date Date Uploaded Access
livingston_strata_V.5.112-995---Copy.xls 36.00kb Jun 2, 2015 Jun 3, 2015 11:18:25 AM Public
  • Translated version livingston_strata_V.5.112-995---Copy_translated.xls (21.50kb)
    Data column(s) in this dataset have been associated with coding sheet(s) and translated: