William Engelbrecht Resources

A summary tabulation of biface fragments by unit.

Sumary tabulation of broken endscrapers by unit.

Summary of broken knives by unit.

This gives the frequency of broken scrapers by unit.

This table contains tabulations of core fragments by unit. Core fragments are defined here as chunks of chert at least 1 inch by .75 inch by .75 inch.

This table tabulates cores by units. Core fragments and exhausted cores are not considered here.

This table tabulates debris by unit. Debris counts do not include utilized flakes or other lithic tools. This table does not include debris from the "Extras" Table.

This table tabulates drills, awls, gravers, and burins by unit. These tools may be broken or whole. The broken tools are generally represented by the tip rather than the base.

This Access Table describes attributes of drills from the Eaton site. See "Drill Attribute List" (468910) for an explanation of the numbers.

These Access Tables contain information on artifacts from the Eaton site. Four tables (Levels 1-4)and a fifth table (Extras) each contain records for 259 2m x 2m excavation units. Each of these tables contain 33 columns reflecting data categories (debris, utilized flakes, etc.). Levels 1 and 2 combined are the plow zone. Successive levels are 10 cm. in thickness. The Extras table contains data from any lower levels, features, or wall scrapings. Clarification of the above tables: Units...

This table tabulates exhausted cores by unit.

This listing of faunal data by unit was created by Marie Lorraine Pipes.

This table tabulates the weight in kilograms of fire altered rock by unit.

This table contains tabulation of ground stone chopping tools by unit. Tools include axes, adzes, and celts.

This table tabulates ground stone tools used for grinding by unit. This category includes grinding slabs/metates and handstones/manos.

This table tabulates ground stone tools used for pounding. This includes hammerstones, mortars, pestles, and anvils.

This table counts ground stone smoothing tools by unit. These tools include whetstones and abraders.

This table tabulates whole knives by unit. Broken knives are tabulated in a separate table.

This table describes 114 Madison Point refits (point tips, point mid-sections, point bases). One triple match was made between a point base, a mid-section, and a tip. A mid-section and tip formed a refit, as did 10 mid-sections with 10 bases. One hundred and two point bases were refit with tips.

This table tabulates multi-purpose tools by unit. Multi-purpose tools include at least two of the following functions: cutting, scraping, and/or drilling.

This table tabulates the distribution of notches (spokeshave scrapers). This category includes utilized flakes with a notch exhibiting use wear. These flakes were not tabulated in the Utilized Flake Table. See also "Distribution of Scraper Varieties."

This table tabulates pipes and pipe fragments by unit. See "Eaton Pipes" (collection) for illustrations.

This table contains Madison point base counts by unit.

This table tabulates point mid-sections by unit. Point mid-sections that fit with point bases or tips are tabulated here and again in the "Point Refit Table." These mid-sections are believed to be from Madison Points. See also "Distribution of Projectile Points and Projectile Point Fragments."

This table tabulates Madison Points by unit. It does not include refit points - see "Point Refit" table.

This table summarizes point tips by unit. The intention is to include just Madison Point tips, but it is possible that some non-Iroquoian point tips are included.

This data set describes Madison point refitted bifaces and contains two more columns than the original Point Refit Table. The distance column measures the distance between refits in meters. The Context column records whether the refit is internal (1) or external (2). Internal refits are those within a defined area (i.e. longhouse) or between associated area (i.e. longhouse and associated midden). Internal can also refer to a refit of two pieces from undefined areas.External refers to a refit...

This table totals whole scrapers by unit. See also broken scraper table.

This Access table lists attributes of chipped stone scrapers and knives from the Eaton site.

This table totals pottery sherds by unit. The counts include both rim and body sherds. These are not vessel counts.

This table totals the number of Stage 2 biface preforms (after Callahan 1979) for each unit.

This table totals Stage 2.5 biface preforms for each unit. This biface preform type is intermediate between Callahan's (1979) Stage 2 and Stage 3.

This table totals Stage 3 biface preforms (after Callahan 1979) for each unit.

This table totals Stage 3.5 biface preforms. This stage is intermediate between Callahan's (1979) Stage 3 and Stage 4.

This table totals tool fragments by unit. The function of the tools of which these fragments are a part could not be determined.

This is a tabulation of whole endscrapers by unit. See also broken endscrapers.

ceramic data from the Adams Site (Seneca area)

ceramic data from the Atwell site (Onondaga area)

ceramic data from the Bach Site (Oneida)

ceramic data from the Barker Site (Mohawk area)

ceramic data from the Barnes Site (Onondaga area)

ceramic data from the Belcher Site (Seneca area)

ceramic data from the Buffum Site (multi-component)

ceramic data from the Burr Site (Jefferson County, NY)

ceramic data from the Buyer Site (Oneida area)

ceramic data from the Cameron Site (Oneida area)

ceramic data from the Carlos Site (Jefferson County, NY)

ceramic data from the Cemetery Site (Onondaga area)

ceramic data from the Chase Site (Onondaga area)

ceramic data from the Chaumont Site (Jefferson County, NY)

ceramic data from the Clifton Springs Site (Cayuga area)

ceramic data from the Cornish Site (Seneca area)

ceramic data from the Cromwell Site (Mohawk area)

ceramic data from the Diable Site (Oneida area)

ceramic data from the Dutch Hollow Site (Seneca area)

ceramic data from the Eaton Site (western New York area)

ceramic data from the Ellis Site (western New York area)

ceramic data from the Englebert Site (Southern Tier area)

ceramic data from the Factory Hollow Site (Seneca area)

ceramic data from the Farrell Site (Seneca area)

ceramic data from the Footer Site (Seneca area)

ceramic data from the Fort Drum Site (Jefferson County, NY)

ceramic data from the Genoa Fort Site (Cayuga area)

ceramic data from the Goodyear Site (western New York area)

ceramic data from the Green Lake Site (western New York area)

ceramic data from the Heath Site

ceramic data from the Kienuka Site (western New York area)

ceramic data from the Kleis Site (western New York area)

ceramic data from the Klinko Site (Cayuga area)

ceramic data from the Martin Site (Mohawk area)

ceramic data from the Newton-Hopper Site (western New York area)

ceramic data from the Nichols Pond Site (Oneida area)

ceramic data from the Power House Site (Seneca area)

ceramic data from the Richmond Mills Site (Seneca area)

ceramic data from the Ripley Site (Erie area)

ceramic data from the Shelby Site (western New York area)

ceramic data from the Silverheels Site (western New York area)

ceramic data from the Simmons Site (western New York area)

ceramic data from the Smith Site (Mohawk area)

ceramic data from the Temperance House Site (Onondaga area)

ceramic data from the Thurston Site (Oneida area)

ceramic data from the Wagner's Hollow Site (Mohawk area)

ceramic data from the Warren Site (Seneca area)

ceramic data from the Wayland-Smith Site (Oneida area)