Cline Mesa Data: Shell Taxa from Screened Contexts

Part of the Roosevelt Platform Mound Study: Cline Terrace Complex, Cline Mesa Sites (DRAFT) project

Creator(s): Office of Cultural Resource Management, Arizona State University

Year: 1997

Summary

The Cline Mesa archaeological sites are part of an extensive settlement complex called the Cline Terrace Complex at the northwestern end of the Tonto Basin, along the eastern bank of Tonto Creek. The Arizona State University, Office of Cultural Resource Management, Roosevelt Platform Mound Study (RPMS) divided the Cline Terrace Complex into three management groups: the Mound, Bandolero, and Indian Point management groups. The Cline Terrace Mound group included the Cline Terrace mound, which is the largest site in the complex and located at the center of the complex, and seven nearby sites. The mound group sites are treated in a separate report volume and the associated data are reported separately (Please see https://core.tdar.org/project/394032). The Cline Mesa sites consist of the remaining 35 archaeological sites along the terraces forming the eastern bank of Tonto Creek and extending to the creek’s confluence with Greenback Creek. Please note that these sites are not necessarily representative of the temporal range in the Cline Mesa settlement complex, as many are Hohokam Late Classic period residential sites on Tonto National Forest land. The Cline Mesa Sites report volumes and data summarize results from the surface collections and excavations at the 35 sites in the complex.

The Cline Mesa Data table Shell Taxa from Screened Contexts presents a summary of the shell taxa of the shell artifacts recovered from excavated, screened contexts at Cline Mesa sites (except Cline Terrace Mound, which is reported separately). The table lists archaeological sites designated by Arizona State Museum (ASM) site numbers (without the "AZ" common to all ASM numbers) (e.g., U:8:205 = ASM site number AZ U:8:205). It then lists designated archaeological contexts - strata - at each site. The strata represent major natural or cultural depositional events such as erosional fill, roof fall, floor contexts, and sterile substrate. Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. In this table, the archaeological contexts - strata - are identified by a combination of numbering systems: the ASM site number, a colon, the feature number, and the stratum letter designation (EX: U:3:198:006A, U:3:198:006B). Within a feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The letters are assigned in descending order. Mixed levels and artifacts collected out of context are designated by a "?". Artifacts from each feature (or mixed context) are tallied according to strata. Please see column metadata for further detail. Please also see the Cline Mesa strata data tables for further data about each stratum, including the assigned stratum type, at the following tDAR urls:

http://core.tdar.org/dataset/394488

http://core.tdar.org/dataset/394486

http://core.tdar.org/dataset/394487

http://core.tdar.org/dataset/394489

http://core.tdar.org/dataset/394490

http://core.tdar.org/dataset/394485

http://core.tdar.org/dataset/394484

The table then provides the frequency (count) of shell artifacts with different shell taxon designations. Note that it provides a count of artifacts (NOT individual shell pieces) identified to individual taxa. Thus, a shell bracelet in 3 pieces identified to a shell taxon will count as 1 artifact for that taxon.

The Cline Mesa Data tables were originally published in the Roosevelt Platform Mound Monograph Series No. 9 titled “Salado Residential Settlements on Tonto Creek, Roosevelt Platform Mound Study: Report on the Cline Mesa Sites, Cline Terrace Complex, Parts 1 and 2.” The tables were published in an appendix at the end of the volume (end of Part 2). Please see the report volume at the following tDAR URL: https://core.tdar.org/document/394299

Cite this Record

Cline Mesa Data: Shell Taxa from Screened Contexts. Office of Cultural Resource Management, Arizona State University. Tempe, Arizona: Office of Cultural Resource Management, Arizona State University. 1997 ( tDAR id: 394504) ; doi:10.6067/XCV89S1T1B

This Resource is Part of the Following Collections

Data Set Structure

Measurement Column
Count Column
Coded Column
Filename Column
Integration Column (has Ontology)

Table Information: clinemesa_screened_shell-species

Column Name Data Type Type Category Coding Sheet Ontology Search
Conus perplexus Frequency of shell artifacts identified to shell taxon Conus perplexus in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Spondylus sp. Frequency of shell artifacts identified to shell taxon Spondylus sp. in a given stratum. Spondylus sp. denotes an unidentified species of the genus Spondylus.
BIGINT  Uncoded Value Shell : Count none none true
Conus regularis Frequency of shell artifacts identified to shell taxon Conus regularis in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Succinea sp. Frequency of shell artifacts identified to shell taxon Succinea sp. in a given stratum. Succinea sp. denotes an unidentified species of the genus Succinea.
BIGINT  Uncoded Value Shell : Count none none true
Trivia sp. Frequency of shell artifacts identified to shell taxon Trivia sp. in a given stratum. Trivia sp. denotes an unidentified species of the genus Trivia.
BIGINT  Uncoded Value Shell : Count none none true
Unidentified Frequency of shell artifacts with an unidentified shell taxon in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
TOTAL The total number of shell artifacts (across all shell taxa) in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Chione sp. Frequency of shell artifacts identified to shell taxon Chione sp. in a given stratum. Chione sp. denotes an unidentified species of the genus Chione.
BIGINT  Uncoded Value Shell : Count none none true
Conus princeps Frequency of shell artifacts identified to shell taxon Conus princeps in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Conus sp. Frequency of shell artifacts identified to shell taxon Conus sp. in a given stratum. Conus sp. denotes an unidentified species of the genus Conus.
BIGINT  Uncoded Value Shell : Count none none true
Agaronia testacea Frequency of shell artifacts identified to shell taxon Agaronia testacca in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Anodonta californiensis Frequency of shell artifacts identified to shell taxon Anodonta californiensis in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Argopecten circularis Frequency of shell artifacts identified to shell taxon Argopecten circularis in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Cerithidea albonodosa Frequency of shell artifacts identified to shell taxon Cerithidea albonodosa in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Glycymeris gigantea Frequency of shell artifacts identified to shell taxon Glycymeris gigantea in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Glycymeris multicostata Frequency of shell artifacts identified to shell taxon Glycymeris multicostata in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Glycymeris sp. Frequency of shell artifacts identified to shell taxon Glycymeris sp. in a given stratum. Glycymeris sp. denotes an unidentified species of the genus Glycymeris.
BIGINT  Uncoded Value Shell : Count none none true
Haliotis sp. Frequency of shell artifacts identified to shell taxon Haliotis sp. in a given stratum. Haliotis sp. denotes an unidentified species of the genus Haliotis.
BIGINT  Uncoded Value Shell : Count none none true
Helisoma sp. Frequency of shell artifacts identified to shell taxon Helisoma sp. in a given stratum. Helisoma sp. denotes an unidentified species of the genus Helisoma.
BIGINT  Uncoded Value Shell : Count none none true
Indet. Freshwater Snail Frequency of shell artifacts identified to shell taxon Indet. Freshwater Snail in a given stratum. This category denotes a freshwater snail of unidentified genus and species.
BIGINT  Uncoded Value Shell : Count none none true
Indet. Gastropod Frequency of shell artifacts identified to shell taxon Indeterminate Gastropod in a given stratum. This category denotes gastropods of indeterminate genus and species.
BIGINT  Uncoded Value Shell : Count none none true
Laevicardium elatum Frequency of shell artifacts identified to shell taxon Laevicardium elatum in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Nassarius moestus Frequency of shell artifacts identified to shell taxon Nassarius moestus in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Nassarius sp. Frequency of shell artifacts identified to shell taxon Nassarius sp. in a given stratum. Nassarius sp. denotes an unidentified species of the genus Nassarius.
BIGINT  Uncoded Value Shell : Count none none true
Nerita sp. Frequency of shell artifacts identified to shell taxon Nerita sp. in a given stratum. Nerita sp. denotes an unidentified species of the genus Nerita.
BIGINT  Uncoded Value Shell : Count none none true
Olivella dama Frequency of shell artifacts identified to shell taxon Olivella dama in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Olivella sp. Frequency of shell artifacts identified to shell taxon Olivella sp. in a given stratum. Olivella sp. denotes an unidentified species of the genus Olivella.
BIGINT  Uncoded Value Shell : Count none none true
Pteria sterna Frequency of shell artifacts identified to shell taxon Pteria sterna in a given stratum.
BIGINT  Uncoded Value Shell : Count none none true
Stratum Identifies a major natural or cultural depositional event such as erosional fill, roof fall, floor contexts, and sterile substrate (i.e., a single archaeological context in both horizontal and vertical space). Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. This table contains data from multiple sites with multiple features and associated strata. Thus, in this table, a stratum is identified by combining several numbering systems: an ASM site number, a colon, a feature number, and a stratum letter designation. EX: U:3:198:006A, U:3:198:006B A stratum is a combination of an individual feature and a context in or associated with that feature. For example, Feature 10 might be a structure with an erosonial fill stratum, a roof fall stratum, a floor stratum, and a sterile substrate stratum. Within each feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The levels excavated in a feature were aggregated into individual feature strata (e.g., Levels 1 - 3 = Stratum A). A feature's stratum letters are assigned in descending order. A context letter of "?" designates a mixed level or context or artifacts collected out of context. Examples: 0? = General Cultural Fill/No Feature and Indeterminate context 10A = Feature 10 and Context A 10B = Feature 10 and Context B 10C = Feature 10 and Context C 22? = Feature 22 and Mixed and/or Undefined context 22A - Feature 22 and Context A Each stratum (e.g., 10C) is assigned to a stratum type. The stratum data are presented in separate strata data tables. Please see the Cline Mesa Strata data tables at the following tDAR urls: http://core.tdar.org/dataset/394488 http://core.tdar.org/dataset/394486 http://core.tdar.org/dataset/394487 http://core.tdar.org/dataset/394489 http://core.tdar.org/dataset/394490 http://core.tdar.org/dataset/394485 http://core.tdar.org/dataset/394484 Examples: 10A = Feature 10 and Context A = Feature 10, erosional fill 10B = Feature 10 and Context B = Feature 10, roof fall 10C = Feature 10 and Context C = Feature 10, floor Artifacts collected from each feature are tallied according to strata. For example, artifacts collected from Feature 10 are tallied for Stratum A, Stratum B, Stratum C, etc.
VARCHAR  Uncoded Value Provenience and Context : Stratum none none true
Site The archaeological sites from which the shell artifacts were recovered. In this table, sites are identified by an Arizona State Museum (ASM) site number. Arizona State Museum numbers begin with the designation "AZ." They then use a three-part numbering system. A letter, beginning with "A" and continuing to "FF", designates one of many arbitrary rectangles that divide the state into rectangular units, each of which includes 16 U.S.G.S topographic maps in a 15-minute series. The letter is followed by a number that refers to a 15-minute series map in a given rectangular unit. The numbers begin with 1 in the northwest corner and continue to 16 in the southeast corner. The map number is followed by a site number, which are allocated sequentially within a 15-minute series map. Each of these elements are separated by colons. At the end of the number, it is customary to provide a short-hand for the state institution that assigned the number (e.g., ASM, ASU, NAU), as several institutions have assigned site numbers throughout Arizona. EX: AZ U:8:23(ASM) Site AZ U:8:23(ASM) also has a a Tonto National Forest site number: AR-03-12-06-177. Please see the Roosevelt Platform Mound Study Site Concordance Table to match the ASM number(s) to the Tonto National Forest number(s).
VARCHAR  Uncoded Value Provenience and Context : Site none none true

Temporal Coverage

Calendar Date: 650 to 1650

Spatial Coverage

min long: -111.273; min lat: 33.741 ; max long: -111.222; max lat: 33.814 ;

Record Identifiers

Roosevelt Monograph Series(s): 9

Anthropological Field Studies(s): 38

Bureau of Reclamation Contract No.(s): 9-CS-32-06230

Notes

General Note: The Archaeological Research Institute, Arizona State University stored and maintained the digital file(s) hosted on this record page as part of the Roosevelt Platform Mound Study (RPMS) digital collections. The data were stored in a single Excel file with multiple tabs. Each tab contained a data sheet that summarized the frequencies of a particular artifact class and/or type that was analyzed during the RPMS laboratory studies. The data sheets were standardized across the different project areas. To curate these data in tDAR, each tab was converted into a single Excel file. Each file contains the frequency data for a particular artifact class and/or type.

General Note: The Office of Cultural Resource Management and the Archaeological Research Institute, Arizona State University intended for the data sheets and the artifact categories in the sheets to remain consistent (i.e., standardized) across the sheets and across the different project areas. During the course of this curation project, several inconsistencies were identified in the artifact categories (i.e., column names). Where appropriate, minor wording, spelling, and/or word order changes were made to column headings to ensure standardization across artifact class and/or type names. For example, some data tables used the column names "Full-Trough Metate," "3/4-Trough Metate," "Slab Metate," etc., while others used the names "Metate, Full-Trough," "Metate, 3/4-Trough," "Metate, Slab." Center for Archaeology and Society and tDAR staff decided to ensure standardization to the "Metate, ..." column names.

File Information

  Name Size Creation Date Date Uploaded Access
clinemesa_screened_shell-species.xlsx 43.49kb Jan 25, 2015 7:31:37 PM Public
  • Translated version clinemesa_screened_shell-species_translated.xls (68.00kb)
    Data column(s) in this dataset have been associated with coding sheet(s) and translated: