Cline Mesa Data: Ceramic Bowl and Jar Data from All Contexts

Part of the Roosevelt Platform Mound Study: Cline Terrace Complex, Cline Mesa Sites (DRAFT) project

Creator(s): Office of Cultural Resource Management, Arizona State University

Year: 1997

Summary

The Cline Mesa archaeological sites are part of an extensive settlement complex called the Cline Terrace Complex at the northwestern end of the Tonto Basin, along the eastern bank of Tonto Creek. The Arizona State University, Office of Cultural Resource Management, Roosevelt Platform Mound Study (RPMS) divided the Cline Terrace Complex into three management groups: the Mound, Bandolero, and Indian Point management groups. The Cline Terrace Mound group included the Cline Terrace mound, which is the largest site in the complex and located at the center of the complex, and seven nearby sites. The mound group sites are treated in a separate report volume and the associated data are reported separately (Please see https://core.tdar.org/project/394032). The Cline Mesa sites consist of the remaining 35 archaeological sites along the terraces forming the eastern bank of Tonto Creek and extending to the creek’s confluence with Greenback Creek. Please note that these sites are not necessarily representative of the temporal range in the Cline Mesa settlement complex, as many are Hohokam Late Classic period residential sites on Tonto National Forest land. The Cline Mesa Sites report volumes and data summarize results from the surface collections and excavations at the 35 sites in the complex.

The Cline Mesa Data table Ceramic Bowls and Jars from All Contexts presents a summary of the basic ceramic vessel forms - bowls and jars - recovered from all investigated contexts (both screened and unscreened) at Cline Mesa sites (except Cline Terrace Mound, which is reported separately).The table lists archaeological sites designated by Arizona State Museum (ASM) site numbers (without the "AZ" common to all ASM numbers) (e.g., U:8:25 = ASM site number AZ U:8:25). It then lists designated archaeological contexts - strata - at each site. The strata represent major natural or cultural depositional events such as erosional fill, roof fall, floor contexts, and sterile substrate. Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. In this table, the archaeological contexts - strata - are identified by a combination of numbering systems: the ASM site number, a colon, the feature number, and the stratum letter designation (EX: U:3:198:006A, U:3:198:006B). Within a feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The letters are assigned in descending order. Mixed levels and artifacts collected out of context are designated by a "?". Artifacts from each feature (or mixed context) are tallied according to strata. Please see column metadata for further detail. Please also see the Cline Mesa strata data tables for further data about each stratum, including the assigned stratum type, at the following tDAR urls:

http://core.tdar.org/dataset/394488

http://core.tdar.org/dataset/394486

http://core.tdar.org/dataset/394487

http://core.tdar.org/dataset/394489

http://core.tdar.org/dataset/394490

http://core.tdar.org/dataset/394485

http://core.tdar.org/dataset/394484

The table then provides the frequency (count) of distinct ceramic bowls and jars assigned to different decorated ceramic types for each stratum. Note that the table presents a count of distinct vessels (i.e., groups of sherds or single sherds assigned to individual vessels) identified to decorated ceramic type. More specifically, it presents a count of rim sherds that were assigned to a single vessel (The Stage 2 Ceramic Decorated/Intrusive analysis examined rim sherds to determine vessel form and ceramic type for individually designated vessels).

The Cline Mesa Data tables were originally published in the Roosevelt Platform Mound Monograph Series No. 9 titled “Salado Residential Settlements on Tonto Creek, Roosevelt Platform Mound Study: Report on the Cline Mesa Sites, Cline Terrace Complex, Parts 1 and 2.” The tables were published in an appendix at the end of the volume (end of Part 2). Please see the report volume at the following tDAR URL: https://core.tdar.org/document/394299

Cite this Record

Cline Mesa Data: Ceramic Bowl and Jar Data from All Contexts. Office of Cultural Resource Management, Arizona State University. Tempe, Arizona: Office of Cultural Resource Management, Arizona State University. 1997 ( tDAR id: 394505) ; doi:10.6067/XCV84B33BG

This Resource is Part of the Following Collections

Data Set Structure

Measurement Column
Count Column
Coded Column
Filename Column
Integration Column (has Ontology)

Table Information: clinemesa_all_bowl_jar

Column Name Data Type Type Category Coding Sheet Ontology Search
Roosevelt Redware Jar Frequency of individual vessels that were identified to the ceramic ware Roosevelt Red Ware and identified as jars. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
TOTAL The total number of vessels identified to a ware and vessel form (both bowls and jars) in a given stratum.
BIGINT  Uncoded Value Ceramic : Count none none true
Roosevelt Redware Bowl Frequency of individual vessels that were identified to the ceramic ware Roosevelt Red Ware and identified as bowls. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Other Plain Bowl Frequency of individual vessels that were identified to different plain wares, other than Salado Red Ware, and identified as bowls. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Site The archaeological sites from which the ceramic bowls and jars were recovered. In this table, sites are identified by an Arizona State Museum (ASM) site number. Arizona State Museum numbers begin with the designation "AZ." They then use a three-part numbering system. A letter, beginning with "A" and continuing to "FF", designates one of many arbitrary rectangles that divide the state into rectangular units, each of which includes 16 U.S.G.S topographic maps in a 15-minute series. The letter is followed by a number that refers to a 15-minute series map in a given rectangular unit. The numbers begin with 1 in the northwest corner and continue to 16 in the southeast corner. The map number is followed by a site number, which are allocated sequentially within a 15-minute series map. Each of these elements are separated by colons. At the end of the number, it is customary to provide a short-hand for the state institution that assigned the number (e.g., ASM, ASU, NAU), as several institutions have assigned site numbers throughout Arizona. EX: AZ U:8:23(ASM) Site AZ U:8:23(ASM) also has a a Tonto National Forest site number: AR-03-12-06-177. Please see the Roosevelt Platform Mound Study Site Concordance Table to match the ASM number(s) to the Tonto National Forest number(s).
VARCHAR  Uncoded Value Provenience and Context : Site none none true
Other Plain Jar Frequency of individual vessels that were identified to different plain wares, other than Salado Red Ware, and identified as jars. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Other Decorated Jar Frequency of individual vessels that were identified to different ceramic decorated wares, other than Roosevelt Red Ware, and identified as jars. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Stratum Identifies a major natural or cultural depositional event such as erosional fill, roof fall, floor contexts, and sterile substrate (i.e., a single archaeological context in both horizontal and vertical space). Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. This table contains data from multiple sites with multiple features and associated strata. Thus, in this table, a stratum is identified by combining several numbering systems: an ASM site number, a colon, a feature number, and a stratum letter designation. EX: U:3:198:006A, U:3:198:006B A stratum is a combination of an individual feature and a context in or associated with that feature. For example, Feature 10 might be a structure with an erosionial fill stratum, a roof fall stratum, a floor stratum, and a sterile substrate stratum. Within each feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The levels excavated in a feature were aggregated into individual feature strata (e.g., Levels 1 - 3 = Stratum A). A feature's stratum letters are assigned in descending order. A context letter of "?" designates a mixed level or context or artifacts collected out of context. Examples: 0? = General Cultural Fill/No Feature and Indeterminate context 10A = Feature 10 and Context A 10B = Feature 10 and Context B 10C = Feature 10 and Context C 22? = Feature 22 and Mixed and/or Undefined context 22A - Feature 22 and Context A Each stratum (e.g., 10C) is assigned to a stratum type. The stratum data are presented in separate strata data tables. Please see the Cline Mesa strata data tables at the following tDAR urls: http://core.tdar.org/dataset/394488 http://core.tdar.org/dataset/394486 http://core.tdar.org/dataset/394487 http://core.tdar.org/dataset/394489 http://core.tdar.org/dataset/394490 http://core.tdar.org/dataset/394485 http://core.tdar.org/dataset/394484 Examples: 10A = Feature 10 and Context A = Feature 10, erosional fill 10B = Feature 10 and Context B = Feature 10, roof fall 10C = Feature 10 and Context C = Feature 10, floor Artifacts collected from each feature are tallied according to strata. For example, artifacts collected from Feature 10 are tallied for Stratum A, Stratum B, Stratum C, etc.
VARCHAR  Uncoded Value Provenience and Context : Stratum none none true
Salado Red Jar Frequency of individual vessels that were identified to the ceramic ware Salado Red Ware and identified as jars. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Other Decorated Bowl Frequency of individual vessels that were identified to different ceramic decorated wares, other than Roosevelt Red Ware, and identified as bowls. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true
Salado Red Bowl Frequency of individual vessels that were identified to the ceramic ware Salado Red Ware and identified as bowls. The Stage 1 Ceramic Analysis assigned ceramic sherds to distinct vessels and then identified basic vessel forms and parts: bowl rims, necks (jar rims and necks), shoulders, bases, bodies, disks, figurines, handles, pinch pots, beads, and other unfired/fired pieces. The Stage 2 analysis examined distinct vessels (groups of sherds or single sherds assigned to individual vessels) to determine body form and detailed ceramic ware and type. This analysis recorded bowl and jar forms (e.g., incurving bowls, inflected restricted jars, etc.). The analysis was typically restricted to diagnostic vessel parts: bowl rims, jar rims/necks, shoulders, and bases. However, it was extended to body sherds in contexts where there were few to no rim/neck sherds. Please see A Laboratory Plan for Salado Research, pp. 3-12 and 3-23 for details on determining vessel form.
BIGINT  Uncoded Value Ceramic : Count none none true

Keywords

Culture
Hohokam • Salado

Material
Ceramic

Site Name
AZ U:3:121(ASM) • AZ U:3:128(ASM) • AZ U:3:131(ASM) • AZ U:3:132(ASM) • AZ U:3:133(ASM) • AZ U:3:137(ASM) • AZ U:3:139(ASM) • AZ U:3:140(ASM) • AZ U:4:10(ASM) • AZ U:4:11(ASM) • AZ U:4:12(ASM) • AZ U:4:13(ASM) • AZ U:4:29(ASM) • AZ U:4:30(ASM) • AZ U:4:32(ASM) • AZ U:4:35(ASM) • AZ U:4:37(ASM) • AZ U:4:47(ASM) • AZ U:4:48(ASM) • AZ U:4:52(ASM) • AZ U:4:60(ASM) • AZ U:4:62(ASM) • AZ U:4:7(ASM) • AZ U:4:75(ASM) • AZ U:4:76(ASM) • AZ U:4:77(ASM) • AZ U:4:8(ASM) • AZ U:4:9(ASM) Show More

Site Type
Artifact Scatter • Funerary and Burial Structures or Features • Hearth • Midden • Pit • Pit House / Earth Lodge • Plaza • Post Hole / Post Mold • Refuse Pit • Roasting Pit / Oven / Horno • Rock Alignment • Room Block / Compound / Pueblo • Settlements • Storage Pit • Trash Midden • Wattle & Daub (Jacal) Structure

Investigation Types
Data Recovery / Excavation • Heritage Management • Site Evaluation / Testing

Geographic Keywords
Cline Terrace • Theodore Roosevelt Lake • Tonto Basin • Tonto Creek

Temporal Keywords
Ash Creek Phase • Gila Phase • Historic • Hohokam Classic period • Hohokam pre-Classic period • Roosevelt Phase

Temporal Coverage

Calendar Date: 650 to 1650

Spatial Coverage

min long: -111.273; min lat: 33.741 ; max long: -111.222; max lat: 33.814 ;

Individual & Institutional Roles

Contact(s): USDI Bureau of Reclamation, Phoenix Area Office

Contributor(s): Peter H. McCartney; Ronna J. Bradley; Judi L. Cameron; J. Phil Dering; Suzanne K. Fish; Mark R. Hackbarth; Chris Loendorf; Marcia H. Regan; Sheldon T. Watson

Lab Director(s): Arleyn W. Simon

Principal Investigator(s): Glen E. Rice; Charles Redman

Sponsor(s): USDI Bureau of Reclamation, Phoenix Area Office

Repository(s): Center for Archaeology and Society, Arizona State University

Prepared By(s): Office of Cultural Resource Management, Arizona State University

Submitted To(s): USDI Bureau of Reclamation, Phoenix Area Office

Record Identifiers

Roosevelt Monograph Series(s): 9

Anthropological Field Studies(s): 38

Bureau of Reclamation Contract No.(s): 9-CS-32-06230

Notes

General Note: The Archaeological Research Institute, Arizona State University stored and maintained the digital file(s) hosted on this record page as part of the Roosevelt Platform Mound Study (RPMS) digital collections. The data were stored in a single Excel file with multiple tabs. Each tab contained a data sheet that summarized the frequencies of a particular artifact class and/or type that was analyzed during the RPMS laboratory studies. The data sheets were standardized across the different project areas. To curate these data in tDAR, each tab was converted into a single Excel file. Each file contains the frequency data for a particular artifact class and/or type.

General Note: The Office of Cultural Resource Management and the Archaeological Research Institute, Arizona State University intended for the data sheets and the artifact categories in the sheets to remain consistent (i.e., standardized) across the sheets and across the different project areas. During the course of this curation project, several inconsistencies were identified in the artifact categories (i.e., column names). Where appropriate, minor wording, spelling, and/or word order changes were made to column headings to ensure standardization across artifact class and/or type names. For example, some data tables used the column names "Full-Trough Metate," "3/4-Trough Metate," "Slab Metate," etc., while others used the names "Metate, Full-Trough," "Metate, 3/4-Trough," "Metate, Slab." Center for Archaeology and Society and tDAR staff decided to ensure standardization to the "Metate, ..." column names.

File Information

  Name Size Creation Date Date Uploaded Access
clinemesa_all_bowl_jar.xlsx 53.97kb Jan 25, 2015 10:59:46 PM Public
  • Translated version clinemesa_all_bowl_jar_translated.xls (102.50kb)
    Data column(s) in this dataset have been associated with coding sheet(s) and translated: