Bowl (Other Keyword)

IMAGE Lori Reed.

Aztec Black, bowl, Accession AZRU-00001 Catalog #851. Morris FS 5477. Analyzed by Lori Reed 2011. Temper is granular igneous rock suggesting manufacture at Aztec Ruin. Vessel is 98% complete with about 2 percent filled in with unknown plaster material. Measurements: 19.5 cm orifice diameter, 10.5 cm height. Image AZRU1-851 A: side view showing bowl shape and exterior band of corrugations. Image AZRU1-851 B: side view showing bowl shape. Image AZRU1-851 C: side view showing bowl shape. Image...

IMAGE Lori Reed.

Chaco Black-on-white, bowl, AMNH Accession 29.0, Catalog #7521, Morris FS 1114. Analyzed by Lori Reed 2004. Temper is medium quartz sand in a silty low fired paste suggesting local production at Aztec. Image AMNH 29.0/7521 A: interior view. Image AMNH 29.0/7521 B: interior closeup of repair. Image AMNH 29.0/7521 C: exterior design view. Image AMNH 29.0/7521 D: view of interior base wear. Image AMNH 29.0/7521 E: closeup of interior design. Recovered from Earl Morris' excavation of Room 48, West...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white (Early style), bowl (fragmentary), Accession AZRU-00008, Catalog #4603, Morris FS 4584. Analyzed by Lori Reed 2006. Sand/sherd/shale temper in a silty, low-fired paste suggests the bowl was manufactured at Aztec. Measurements: 13 cm orifice diameter (estimate); 13 cm height (estimate). Image AZRU8-4603 A: interior view of bowl sherds showing design around rim and sandal imagery on the bowl base. Recovered from Earl Morris excavation of Kiva R, Aztec West Ruin. No...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl (fragmentary), Accession AZRU-00008, Catalog #4991, Morris FS 4585. Analyzed by Lori Reed 2006. Sherd/sand/shale temper and low-fired silty paste suggest the bowl was manufactured at Aztec or another site in the Middle San Juan region. Bowl fragments represent only about 40% of vessel. Measurements: 21 cm orifice diameter; height unknown. Image AZRU8-4991 A: rim fragments showing interior design (top and lower left) and exterior surface of rim fragment showing...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl (fragmentary), Accession AZRU-00008, Catalog #4992, Morris FS 4586. Analyzed by Lori Reed 2006. Sand temper and low-fired silty paste suggest the bowl was manufactured at Aztec or another site in the Middle San Juan region. Bowl fragments represent only about 40% of vessel. Measurements: 18 cm orifice diameter; height unknown. Image AZRU8-4992 A: rim fragments showing interior design. Recovered from Earl Morris excavation of Kiva R, Aztec West Ruin. No...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl (fragmentary), Accession AZRU-00008, Catalog #4993, Morris FS 4587. Analyzed by Lori Reed 2006. Sand/sherd temper and low-fired silty paste suggest the bowl was manufactured at Aztec or another site in the Middle San Juan region. Bowl fragments represent only about 40% of vessel. Measurements: 16 cm orifice diameter, 8 cm height. Image AZRU8-4993 A: rim fragments (restored) showing interior design. Recovered from Earl Morris excavation of Kiva R, Aztec West...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl, Accession 29.0, Catalog #6898. Morris FS 505. Analyzed by Lori Reed 2004. Temper is sand and sherd in a well-fired paste suggesting production in the Chaco Cibola region. Bowl is restored with unknown adhesive but roughly 30% is missing. Measurements: 24.5 cm orifice diameter; 9.5 cm height. Image AMNH 29.0/6898 A: closeup of interior design. Image AMNH 29.0/6898 B: interior view showing full design layout. Note: exterior surface is slipped and unpainted....

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl, AMNH Accession 29.0, Catalog #6980, Morris FS 587. Analyzed by Lori Reed 2004. Temper is fine sand and shale in a silty paste suggesting manufacture at Aztec or in the Middle San Juan region. Bowl is 45% complete with restoration using unknown adhesive. Image AMNH 29.0/6980a: exterior view. Image AMNH 29.0/6980b: interior view. Recovered from Earl Morris' excavation of Room 47, West Ruin, Aztec Ruins. Room 47 is in the east wing of West Ruin. Earl Morris’...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl, AMNH Accession 29.0, Catalog #6986, Morris FS 597. Analyzed by Lori Reed 2004. Temper is fine sand in a silty paste suggesting manufacture at Aztec or in the Middle San Juan region. Bowl is 60% complete with reconstruction using an unknown adhesive. Image AMNH 29.0/6986 A: interior view. Image AMNH 29.0/6986 B: exterior view. Image AMNH 29.0/6986 C: interior design view. Recovered from Earl Morris' excavation of Room 47, West Ruin, Aztec Ruins.Room 47 is in...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl, Accession 29.0, Catalog #8096. Morris FS 1642. CULTURALLY SENSITIVE: NAGPRA ARTIFACT; ACCESS RESTRICTED. Analyzed by Lori Reed 2004. Temper not analyzed; not visible. Well fired paste, washy slip, and slipslop over exterior suggests Chaco Cibola manufacture. Measurements: 22.4 cm orifice diameter; 9.6 cm height. Image AMNH29-8096 A: exterior view of base showing painted X and edges of slipslop visible in lower right. Image AMNH29-8096 B: interior view showing...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl, Accession AZRU-00001, Catalog #827, Morris FS 4274. Analyzed by Lori Reed 2006. Temper is sand and sherd, but based on paste and slip textures the bowl may have been manufactured at Aztec. Bowl is 99% complete with minimal reconstruction with unknown plaster material. Measurements: 22.5 cm orifice diameter, 8.5 cm height. Image AZRU1-825 A: oblique view of exterior showing bowl shape; note the slip-slop over exterior rim edge typical of Chaco-McElmo. Image...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl, Accession AZRU-00001, Catalog #839, Morris FS 4575. Analyzed by Lori Reed 2006. Bright white washy slip and sand/sherd indicated manufacture in the Chaco-Cibola region. Bowl is 85% complete with restoration using unknown adhesive. Measurements: 22.4 cm orifice diameter, 9.4 cm height. Image AZRU1-839 A: closeup of interior design. Image AZRU1-839 B: view of interior design. Image AZRU1-824 C: view of exterior showing shape of bowl and slip-slop over rim edge....

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl, Accession AZRU-00001, Catalog #965, Morris FS 4281. Analyzed by Lori Reed 2006. Bright white washy slip and sand/sherd indicated manufacture in the Chaco-Cibola region. Bowl is 75% complete with roughly 25% restoration using unknown adhesive. Measurements: 21.2 cm orifice diameter, 9.5 cm height. Image AZRU1-965 A: exterior view showing bowl shape and slip-slop over exterior rim. Image AZRU1-965 B: closeup of interior design also showing washy application of...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, bowl (fragmentary), Accession AZRU-00008, Catalog #4986, Morris FS 4283. Analyzed by Lori Reed 2006. Sand/shale temper and low fired silty paste suggest the bowl was manufactured at Aztec. Bowl fragments represent only about 60% of vessel. Measurements: 22 cm orifice diameter (estimate); height unknown. Image AZRU8-4986 A: bowl fragments showing painted design below rim (upper left), exterior slip-slop over rim edge (upper right), painted design on upper body sherd...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, miniature clam shell (bivalve) bowl, Accession AZRU-00001, Catalog #992, Morris FS 4612. Analyzed by Lori Reed 2006. Temper is sand examined on the exterior base surface; bright white washy slip suggests bowl was manufactured in the Chaco Cibola region. Bowl was reconstructed with 75% original fragments and 25% unknown paster material. Measurements: 8 cm orifice diameter, 3.6 cm height. Image AZRU1-992 A: exterior view showing vessel shape. Image AZRU1-992 B:...

IMAGE Lori Reed.

Chaco-McElmo Black-on-white, miniature shallow bowl, Accession AZRU-00001, Catalog #991, Morris FS 4613. Analyzed by Lori Reed 2006. Temper is unknown; bright white washy slip suggests bowl was manufactured in the Chaco Cibola region. Bowl was reconstructed with 50% original fragments and 50% unknown paster material. Measurements: 12 cm rim diameter, 3 cm height. Image AZRU1-991 A: interior view showing painted design. Note: lower half of bowl with dark color surface is a plaster material...

IMAGE Lori Reed.

Corrugated gray, bowl, Accession AZRU-00001 Catalog #997. Morris FS 4782. Analyzed by Lori Reed 2011. Exterior surface is partially obliterated corrugated and interior surface is scraped plain. Temper is granular igneous rock suggesting manufacture at Aztec. Vessel is 100% complete with 40% reconstructed with unknown plaster material. Measurements: 11.6 cm diameter, 5.5 cm height. Image AZRU1-997 A: interior view showing orifice and interior surface. Image AZRU1-997 B: interior view showing...

IMAGE Lori Reed.

Dogoszhi style black-on-white (type and tradition unknown), bowl, Accession AZRU-00001, Catalog #813, Morris FS 4296. Analyzed by Lori Reed 2006. Temper is unknown; not visible. Bowl is 100% complete, with 5% reconstruction with unknown plaster material at the rim. Measurements: 20 cm orifice diameter, 12.5 cm height. Image AZRU1-813 A: Exterior view showing corrugations and rim fillet. AZRU1-813 B: interior view of rim showing plaster material reconstruction. AZRU1-813 C: closeup of interior...

IMAGE Lori Reed.

Escavada Black-on-white, bowl, Accession AZRU-00001, Catalog #976, Morris FS 4579. Analyzed by Lori Reed 2006. Washy white slip and sand/sherd temper indicate manufacture in the Chaco Cibola region. Bowl is 100% complete with about 70% original vessel and 30% a reconstruction with unknown paster material. Measurements: 19 cm orifice diameter, 8.7 cm height. Image AZRU1-976 A: interior view showing painted design. Image AZRU1-976 B: exterior view showing shape of bowl. Recovered from Earl Morris...

IMAGE Lori Reed.

Escavada Black-on-white, bowl (fragmentary), Accession AZRU-00008, Catalog #4994, Morris FS 4588. Analyzed by Lori Reed 2006. Sand/shale temper and low-fired silty paste suggest the bowl was manufactured at Aztec or another site in the Middle San Juan region. Bowl fragments represent only about 50% of vessel. Measurements: 28 cm orifice diameter; height unknown. Image AZRU8-4994 A: rim fragments showing interior design (top) and exterior surface of rim showing strap handle (lower right)....

IMAGE Lori Reed.

Escavada Black-on-white, bowl, Accession AZRU-00008 Catalog #2091. Morris FS 2477. Analyzed by Lori Reed 2011. Temper is sand and sherd suggesting manufacture in the Chaco Cibola region. Vessel is 90% restored with unknown adhesive and 10% unknown plaster reconstruction. Measurements: 16 cm diameter, 7.9 cm height. Image AZRU8-2091 A: view of interior showing painted design (note on right side of rim a broken section that may have been the attachment for an applique or appendage). Image...

IMAGE Lori Reed.

Flagstaff Black-on-white, bowl, Accession AZRU-00001, Catalog #824, Morris FS 4276. Analyzed by Lori Reed 2006. Temper is fine quartz sand, suggesting manufacture in the Kayenta region. Bowl is 100% complete. Measurements: 21.4 cm orifice diameter, 9.5 cm height. Image AZRU1-824 A: Oblique view of exterior showing bowl shape and rim ticking. Image AZRU1-824 B: interior view of bowl showing design. Recovered from Earl Morris excavation of Kiva Q, Aztec West Ruin. Morris (1924:257) mentions Kiva...

IMAGE Lori Reed.

Gallup Black-on-white, bowl (fragmentary), Accession AZRU-00008, Catalog #4985, Morris FS 4280. Analyzed by Lori Reed 2006. Sand/sherd temper and well fired paste suggest the bowl was manufactured in the Chaco Cibola region. Bowl fragment represent only about 40% of vessel. Image AZRU8-4985 A: interior view of rim fragments showing painted design and a drill hole. Image AZRU8-4985 B: interior view of rim, body, and base fragments showing interior painted design. Recovered from Earl Morris...

IMAGE Lori Reed.

Mancos Black-on-white (Dogoszhi style), bowl, Accession AZRU-00001, Catalog #983, Morris FS 4574. Analyzed by Lori Reed 2006. Temper is granular igneous rock and sand indicating manufacture at Aztec. Bowl was reconstructed with about 80% original fragments and 15% unknown paster material; 5% is missing. Measurements: 23 cm orifice diameter, 13 cm height. Image AZRU1-983 A: exterior view showing shape of bowl and isolated design element appended to rim. Image AZRU1-983 B: closeup of interior...

IMAGE Lori Reed.

Mancos Black-on-white (Mancos style), bowl (fragmentary), Accession AZRU-00001, Catalog #811, Morris FS 4577. Analyzed by Lori Reed 2006. Temper is identified as diorite porphyry, sand, and sherd suggesting production in the central Mesa Verde region. Bowl is in fragments 80% original pieces, 10% missing, and 10% reconstruction with unknown plaster material. Bowl had been restored and reconstructed, but is now fragmentary. Measurements: 20 cm orifice diameter estimate. Image AZRU1-811 A: Rim...