Schoolhouse Point Mesa Data: Lithic Size Class Data from Screened Contexts
Part of the Roosevelt Platform Mound Study: Pinto Creek Complex, Schoolhouse Mesa Sites (DRAFT) project
Creator(s): Office of Cultural Resource Management, Arizona State University
Year: 1997
Summary
The Schoolhouse Point Mesa archaeological sites are part of an extensive settlement system on the southern banks of the Salt River. The Arizona State University, Office of Cultural Resource Management, Roosevelt Platform Mound Study (RPMS) divided the Schoolhouse Point Mesa settlement complex into two groups: the Schoolhouse Management Group and the Livingston Management Group. The Schoolhouse Management Group includes those sites on the west side of Pinto Creek Wash, while the Livingston Management Group includes sites on the east side of the wash. Schoolhouse Point Mound (AZ U:8:24(ASM), AR-03-12-06-13a(USFS)) is the largest site in the Schoolhouse Management Group and on the mesa. The mound is treated in a separate report volume and its data are reported separately (Please see https://core.tdar.org/project/394037). The Schoolhouse Point Mesa report volumes and data document the remaining 23 archaeological sites in the Schoolhouse Management Group. Nineteen of the sites are located on the mesa, while four are west of the mesa on the terraces overlooking the Salt River.
The Schoolhouse Point Mesa Data table Lithic Size Class from Screened Contexts presents a summary of the size grades of the lithic artifacts recovered from excavated, screened contexts at Schoolhouse Point Mesa sites (except Schoolhouse Point Mound, which is reported separately). The table lists archaeological sites designated by Arizona State Museum (ASM) site numbers (without the "AZ" common to all ASM numbers) (e.g., U:8:205 = ASM site number AZ U:8:205). It then lists designated archaeological contexts - strata - at each site. The strata represent major natural or cultural depositional events such as erosional fill, roof fall, floor contexts, and sterile substrate. Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. In this table, the archaeological contexts - strata - are identified by a combination of numbering systems: the ASM site number, a colon, the feature number, and the stratum letter designation (EX: U:3:198:006A, U:3:198:006B). Within a feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The letters are assigned in descending order. Mixed levels and artifacts collected out of context are designated by a "?". Artifacts from each feature (or mixed context) are tallied according to strata. Please see column metadata for further detail. Please also see the Schoolhouse Point Mesa strata data tables for further data about each stratum, including the assigned stratum type, at the following tDAR urls:
https://core.tdar.org/dataset/394455
https://core.tdar.org/dataset/394457
https://core.tdar.org/dataset/394458
https://core.tdar.org/dataset/394376
The table then provides the frequency (count) of lithic artifacts within different size grades (bins). All lithic artifacts (from screened contexts) - irrespective of artifact type and material type - were assigned to a size class.
The Schoolhouse Point Mesa Data tables were originally published in the Roosevelt Platform Mound Monograph Series No. 8 titled "The Archaeology of Schoolhouse Point Mesa, Roosevelt Platform Mound Study: Report on the Schoolhouse Point Mesa Sites, Schoolhouse Management Group, Pinto Creek Complex." The tables were published in an appendix at the end of the volume. Please see the report volume at the following tDAR URL: https://core.tdar.org/document/394293
Cite this Record
Schoolhouse Point Mesa Data: Lithic Size Class Data from Screened Contexts. Office of Cultural Resource Management, Arizona State University. Tempe, Arizona: Office of Cultural Resource Management, Arizona State University. 1997 ( tDAR id: 394477) ; doi:10.6067/XCV8TF00C1
This Resource is Part of the Following Collections
Data Set Structure
Table Information: shmesa_screened_lithic-size
| Column Name | Data Type | Type | Category | Coding Sheet | Ontology | Search |
|---|---|---|---|---|---|---|
| 1 to 2 cm | Frequency of lithic artifacts that range in size from 1 to 2 cm (i.e., fit into the < 2 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| Site | The archaeological sites from which the lithic artifacts were recovered. In this table, sites are identified by an Arizona State Museum (ASM) site number. Arizona State Museum numbers begin with the designation "AZ." They then use a three-part numbering system. A letter, beginning with "A" and continuing to "FF", designates one of many arbitrary rectangles that divide the state into rectangular units, each of which includes 16 U.S.G.S topographic maps in a 15-minute series. The letter is followed by a number that refers to a 15-minute series map in a given rectangular unit. The numbers begin with 1 in the northwest corner and continue to 16 in the southeast corner. The map number is followed by a site number, which are allocated sequentially within a 15-minute series map. Each of these elements are separated by colons. At the end of the number, it is customary to provide a short-hand for the state institution that assigned the number (e.g., ASM, ASU, NAU), as several institutions have assigned site numbers throughout Arizona. EX: AZ U:8:23(ASM) Site AZ U:8:23(ASM) also has a a Tonto National Forest site number: AR-03-12-06-177. Please see the Roosevelt Platform Mound Study Site Concordance Table to match the ASM number(s) to the Tonto National Forest number(s). | |||||
| VARCHAR | Uncoded Value | Provenience and Context : Site | none | none | true | |
| TOTAL | The total number of lithic artifacts across all size classes in a given stratum. | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| 13 to 14 cm | Frequency of lithic artifacts that range in size from 13 to 14 cm (i.e., fit into the 12 to 13.9 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| 15 to 16 cm | Frequency of lithic artifacts that range in size from 15 to 16 cm (i.e., fit into the 14 to 15.9 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| Over 16 cm | Frequency of lithic artifacts that are over 16 cm in size (i.e., fit into the > 16 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| 9 to 10 cm | Frequency of lithic artifacts that range in size from 9 to 10 cm (i.e., fit into the 8 to 9.9 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| 11 to 12 cm | Frequency of lithic artifacts that range in size from 11 to 12 cm (i.e., fit into the 10 to 11.9 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| Stratum | Identifies a major natural or cultural depositional event such as erosional fill, roof fall, floor contexts, and sterile substrate (i.e., a single archaeological context in both horizontal and vertical space). Strata are depicted as horizontal rows of interconnected boxes on a Harris Matrix. This table contains data from multiple sites with multiple features and associated strata. Thus, in this table, a stratum is identified by combining several numbering systems: an ASM site number, a colon, a feature number, and a stratum letter designation. EX: U:3:198:006A, U:3:198:006B A stratum is a combination of an individual feature and a context in or associated with that feature. For example, Feature 10 might be a structure with an erosonial fill stratum, a roof fall stratum, a floor stratum, and a sterile substrate stratum. Within each feature, each stratum is designated by the feature number (e.g., 10, 11, 12, etc.) and a letter that designates a particular stratum (e.g., A, B, C). The levels excavated in a feature were aggregated into individual feature strata (e.g., Levels 1 - 3 = Stratum A). A feature's stratum letters are assigned in descending order. A context letter of "?" designates a mixed level or context or artifacts collected out of context. Examples: 0? = General Cultural Fill/No Feature and Indeterminate context 10A = Feature 10 and Context A 10B = Feature 10 and Context B 10C = Feature 10 and Context C 22? = Feature 22 and Mixed and/or Undefined context 22A - Feature 22 and Context A Each stratum (e.g., 10C) is assigned to a stratum type. The stratum data are presented in separate strata data tables. Please see the Schoolhouse Point Mesa Strata data tables at the following tDAR urls: https://core.tdar.org/dataset/394455 https://core.tdar.org/dataset/394457 https://core.tdar.org/dataset/394458 https://core.tdar.org/dataset/394376 Examples: 10A = Feature 10 and Context A = Feature 10, erosional fill 10B = Feature 10 and Context B = Feature 10, roof fall 10C = Feature 10 and Context C = Feature 10, floor Artifacts collected from each feature are tallied according to strata. For example, artifacts collected from Feature 10 are tallied for Stratum A, Stratum B, Stratum C, etc. | |||||
| VARCHAR | Uncoded Value | Provenience and Context : Stratum | none | none | true | |
| 7 to 8 cm | Frequency of lithic artifacts that range in size from 7 to 8 cm (i.e., fit into the 6 to 7.9 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| 5 to 6 cm | Frequency of lithic artifacts that range in size from 5 to 6 cm (i.e., fit into the 4 to 5.9 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
| 3 to 4 cm | Frequency of lithic artifacts that range in size from 3 to 4 cm (i.e., fit into the 2 to 3.9 cm size class). The Stage 2 Lithic Size Class analysis size was conducted in a separate step from the material and artifact class count. All lithic pieces were pooled and then resorted into size grades through the use of a template (or a series of graduated size sorting screens). The size grades are as follows: S1 = < 2 cm S2 = 2.0 – 3.9 cm S3 = 4.0 – 5.9 cm S4 = 6.0 – 7.9 cm S5 = 8.0 – 9.9 cm S6 = 10.0 – 11.9 cm S7 = 12.0 – 13.9 cm S8 = 14.0 – 15.9 cm S9 = 16.0 + cm | |||||
| BIGINT | Uncoded Value | Chipped Stone : Count | none | none | true | |
Keywords
Material
Chipped Stone
Site Name
AZ U:8:152(ASM)
•
AZ U:8:159(ASM)
•
AZ U:8:25(ASM)
•
AZ U:8:304(ASM)
•
AZ U:8:318(ASM)
•
AZ U:8:384(ASM)
•
AZ U:8:385(ASM)
•
AZ U:8:450(ASM)
•
AZ U:8:451(ASM)
•
AZ U:8:452(ASM)
•
AZ U:8:453(ASM)
•
AZ U:8:454(ASM)
•
AZ U:8:456(ASM)
•
AZ U:8:457(ASM)
•
AZ U:8:458(ASM)
•
AZ U:8:577(ASM)
•
AZ V:5:137(ASM)
•
AZ V:5:138(ASM)
Site Type
Artifact Scatter
•
Domestic Structure or Architectural Complex
•
Funerary and Burial Structures or Features
•
Midden
•
Pit House / Earth Lodge
•
Plaza
•
Post Hole / Post Mold
•
Refuse Pit
•
Roasting Pit / Oven / Horno
•
Rock Alignment
•
Room Block / Compound / Pueblo
•
Settlements
Investigation Types
Architectural Documentation
•
Data Recovery / Excavation
•
Heritage Management
•
Methodology, Theory, or Synthesis
Geographic Keywords
Pinto Creek Complex
•
Theodore Roosevelt Lake
•
Tonto Basin
•
Tonto National Forest
Temporal Keywords
Gila Phase
•
Hohokam Classic period
•
Hohokam pre-Classic period
•
Hohokam Sedentary period
•
Roosevelt Phase
Temporal Coverage
Calendar Date: 900 to 1450
Spatial Coverage
min long: -111.012; min lat: 33.635 ; max long: -110.991; max lat: 33.662 ;
Individual & Institutional Roles
Contact(s): USDI Bureau of Reclamation, Phoenix Area Office
Contributor(s): Peter H. McCartney; Ronna J. Bradley; Judi L. Cameron; J. Phil Dering; Suzanne K. Fish; Chris Loendorf; Theodore J. Oliver; Marcia H. Regan; Christy G. Turner II; Sheldon T. Watson; Linda K. Williams
Lab Director(s): Arleyn W. Simon
Principal Investigator(s): Glen E. Rice; Charles Redman
Sponsor(s): USDI Bureau of Reclamation, Phoenix Area Office
Repository(s): Center for Archaeology and Society, Arizona State University
Prepared By(s): Office of Cultural Resource Management, Arizona State University
Submitted To(s): USDI Bureau of Reclamation, Phoenix Area Office
Record Identifiers
Roosevelt Monograph Series(s): 8
Anthropological Field Studies(s): 37
Bureau of Reclamation Contract No.(s): 9-CS-32-06230
Notes
General Note: The Archaeological Research Institute, Arizona State University stored and maintained the digital file(s) hosted on this record page as part of the Roosevelt Platform Mound Study (RPMS) digital collections. The data were stored in a single Excel file with multiple tabs. Each tab contained a data sheet that summarized the frequencies of a particular artifact class and/or type that was analyzed during the RPMS laboratory studies. The data sheets were standardized across the different project areas. To curate these data in tDAR, each tab was converted into a single Excel file. Each file contains the frequency data for a particular artifact class and/or type.
General Note: The Office of Cultural Resource Management and the Archaeological Research Institute, Arizona State University intended for the data sheets and the artifact categories in the sheets to remain consistent (i.e., standardized) across the sheets and across the different project areas. During the course of this curation project, several inconsistencies were identified in the artifact categories (i.e., column names). Where appropriate, minor wording, spelling, and/or word order changes were made to column headings to ensure standardization across artifact class and/or type names. For example, some data tables used the column names "Full-Trough Metate," "3/4-Trough Metate," "Slab Metate," etc., while others used the names "Metate, Full-Trough," "Metate, 3/4-Trough," "Metate, Slab." Center for Archaeology and Society and tDAR staff decided to ensure standardization to the "Metate, ..." column names.
File Information
| Name | Size | Creation Date | Date Uploaded | Access | |
|---|---|---|---|---|---|
| shmesa_screened_lithic-size.xlsx | 55.33kb | Jan 23, 2015 12:25:32 PM | Public | ||
|
Translated version
shmesa_screened_lithic-size_translated.xls
(68.00kb)
Data column(s) in this dataset have been associated with coding sheet(s) and translated:
|
|||||