PaleoIndian (Culture Keyword)
1,101-1,125 (1,837 Records)
The unusually high concentration of Paleoindian period sites in the Salado Draw area provides a unique opportunity to gain significant new knowledge about the Paleoindian period occupation of southeastern New Mexico. In addition to Paleoindian period materials—which include Clovis, Folsom, Dalton, Plainview, Midland, Angostura, Golondrina, and Wilson projectile points—the Salado Draw project area also contains site components dating to the Archaic, Formative, and historical periods. This study,...
Geophysical Prospection And Archeological Investigations Of The Proposed Bridge Replacement, Entrance Road Realignment, And New Visitor Parking Lot Project At The Fort Larned National Historic Site, 14PA305, Pawnee County, Kansas (2012)
The National Park Service’s Midwest Archeological Center staff with Volunteer- In-Parks participants conducted geophysical investigations of the underground electric line installation construction project at the Fort Larned National Historic Site (14PA305) in Pawnee County, Kansas. The geophysical investigations were conducted between July 13 and July 18, 2009. The investigations were requested by the FOLS resource manager at the Fort Larned National Historic Site. The project was located along...
Gorget, Feature 50 (1995)
A two hole banded slate gorget found in Feature 50 along with Iroquoian materials.
Goshen Paleoindian Complex: a Clovis Variant and the Direct Precursor of Folsom (1986)
This resource is a citation record only, the Center for Digital Antiquity does not have a copy of this document. The information in this record has been migrated into tDAR from the National Archaeological Database Reports Module (NADB-R) and updated. Most NADB-R records consist of a document citation and other metadata but do not have the documents themselves uploaded. If you have a digital copy of the document and would like to have it curated in tDAR, please contact us at comments@tdar.org.
The Grand Canyon River Corridor Survey Project: Archaeological Survey Along the Colorado River Between Glen Canyon Dam and Separation Canyon (1994)
Between August 30,1990 and May 10,1991, an archaeological inventory was completed along a 255-mile-long segment of the Colorado River corridor from the base of Glen Canyon Dam to Separation Canyon. This survey was undertaken by the National Park Service (NPS) in Grand Canyon National Park (GRCA) and Glen Canyon National Recreation Area (GLCA) to provide baseline cultural resource information to the Bureau of Reclamation (BOR) for inclusion in the Glen Canyon Dam Environmental Impact Statement...
Great Basin (In Handbook of North American Indians) Vol. II (1986)
This resource is a citation record only, the Center for Digital Antiquity does not have a copy of this document. The information in this record has been migrated into tDAR from the National Archaeological Database Reports Module (NADB-R) and updated. Most NADB-R records consist of a document citation and other metadata but do not have the documents themselves uploaded. If you have a digital copy of the document and would like to have it curated in tDAR, please contact us at comments@tdar.org.
Grinding Stones (2010)
Two grinding stones (metates)
The Ground Beneath Her Feet: The Archeology of Liberty Island, Statue of Liberty National Monument, New York, New York (2003)
This book has been written to inform the public about the information gathered from the recently completed three-year archeological project on Liberty Island, New York, NY. The first year, or more accurately the first season, of the project was devoted to thorough, but not exhaustive, documentary investigation of the island. During this time, numerous libraries and archives were visited in an attempt to collect as much information as possible about the island’s history and prehistory....
Ground Stone Chopping Tool Summary (2013)
This table contains tabulation of ground stone chopping tools by unit. Tools include axes, adzes, and celts.
Ground Stone Distribution (2012)
Ground stone was tabulated by inferred function, not morphology. Grinding = grinding slabs and handstones (metates and manos) Pounding = hammerstones, mortars, pestles, anvils Chopping = celts, adzes Smoothing/sharpening = whetstones, abraders
Ground Stone Grinding Tool Summary (2013)
This table tabulates ground stone tools used for grinding by unit. This category includes grinding slabs/metates and handstones/manos.
Ground Stone Pounding Tool Summary (2013)
This table tabulates ground stone tools used for pounding. This includes hammerstones, mortars, pestles, and anvils.
Ground Stone Smoothing Tool Summary (2013)
This table counts ground stone smoothing tools by unit. These tools include whetstones and abraders.
Ground Stone.csv (2020)
add description
Guide for Salvage Archaeology (1962)
This guide was prepared in connection with an experimental training course in salvage archaeology conducted by the Museum of New Mexico and the Fort Burgwin Research Center with the cooperation and assistance of the National Science Foundation. The course was designed to acquaint a small group of advanced student archaeologists with the special problems and techniques of salvage archaeology, and to prepare these students for positions of responsibility in those salvage programs which are...
Guide to the Identification of Certain American Indian Projectile Points (1958)
This guide to the identification of certain American Indian projectile points is designed to acquaint the reader with a series of projectile point types that have been identified and named by archaeologists. As a guide it is far from complete, and there are many additional types of projectile points that are not included; also, there are a number of distinctive forms which have not been typed. There are somewhere between 150 and 200 projectile point types that have been named in the United...
Guide To the Identification of Certain American Indian Projectile Points (1968)
Special Bulletin No. 3 is a continuation of the Guide to the Identification of Certain American Indian Projectile Points, published by the Oklahoma Anthropological Society in December 1958, and October 1960. Information and pen drawings are presented for 50 projectile point types that have been recognized in the United States and Canada. There are 150 point types included in the three Special Bulletins; still, not all are included that have been recognized or identified throughout the...
Guide To the Identification of Certain American Indian Projectile Points (1960)
This Bulletin, Special Bulletin No. 2, is a continuation of the Guide to the Identification of Certain American Indian Projectile Points published by the Oklahoma Anthropological Society in December, 1958. Information and pen drawings are presented for 50 projectile point types that have been recognized in the United States. This makes one hundred point types that have been included in the Special Bulletins, but it does not include all that has been recognized or identified throughout the...
Guide to the Identification of Certain American Indian Projectile Points (1971)
Special Bulletin No. 4 is a continuation of the Guide to the Identification of Certain American Indian Projectile Points, published by the Oklahoma Anthropological Society in December, 1958, October, 1960, and October 1968. Information and pen drawings are presented for 50 projectile point types that have been recognized in the United States and Canada. There are 200 point types included in the four Special Bulletins; still, not all are included which have been recognized or identified...
The Guntersville, Alabama Area (1960)
This resource is a citation record only, the Center for Digital Antiquity does not have a copy of this document. The information in this record has been migrated into tDAR from the National Archaeological Database Reports Module (NADB-R) and updated. Most NADB-R records consist of a document citation and other metadata but do not have the documents themselves uploaded. If you have a digital copy of the document and would like to have it curated in tDAR, please contact us at comments@tdar.org.
Hafted Items (1985)
The Reductive Technologies Group (RTG) was headed by Roger A. Moore between 1978 and 1979 and by Carl J. Phagan from 1979 to 1985, with the assistance of T. Homer Hruby between 1980 and 1984; supporting work was provided by crew chiefs Gail G. Snyder and Phillip D. Neusius. This DAP analysis group was responsible for supporting the broad research goals of the DAP through the implementation of mid-level research design governing the collection and analysis of data from “artifacts which were...
Handbook for the Prehistory and History Relating to the Scott Joint-Use Project (2022)
The Scott Project, directed by the Office of Contract Archaeology, Southern Illinois University at Edwardsville and funded by the Illinois Department of Transportation, was initiated during 1988 in response to the planned construction of a civilian air cargo facility that is to operate jointly with the present Scott Air Force Base. The project area, located in southwestern Illinois in southeastern St. Clair county, encompasses nearly 4,000 acres. The projected expansion area encompasses a range...
Hangar No 1, final nomination (1975)
This is the original National Register of Historic Places nomination form for Hangar No. 1 in Lakehurst's Lighter-Than-Air (LTA) Historic District. Hangar No. 1 is a 961ft.-long, 200ft-high, 350ft-wide, steel arch hangar built in 1921 to house U.S. Navy dirigibles. Hangar No. 1 served as the primary hangar for international airship flights, and was the site of the German Zeppelin Hindenburg airship crash in 1937.
Hanover Furnace Management Plan at Joint Base McGuire-Dix-Lakehurst, New Jersey (2020)
Review of cultural context and previous research and evaluation surveys for the Hanover Furnace historic property (28BU512 and 28BU514) and its associated sites: 28BU513, 28BU944 and 28BU945. Summary of management recommendations for conservation of archaeological sites associated with Hanover Furnace, including: nomination as an archaeological district, avoidance of ground disturbance, routine condition assessments, enhance law enforcement patrols to discourage looting and vandalism, and...
Hanover Furnace, final nomination (1974)
This is the original National Register of Historic Places nomination form for the Hanover Furnace historic property. Hanover Furnace dates from the post revolutionary period and contained an iron furnace, iron master's house, workers houses, and a sawmill. The furnace supported a community of over 200 people and lasted until the raw materials were depleted in the 1840's.